And to you, and to Chook too, of course. Sydney just has the best fireworks, doesn't it? Though I'm glad that Mr Dog and I don't live there. It'll be rough enough here. Row, I think you've done a great job. Yes, the roller blind may no longer live in that room. Thanks for sharing the other pics -- see, you were dreaming of pattern on walls before I came along.

A couple of things from me. Firstly, the cornice painted a yellow makes the ceilings feel lower than necessary, paint them out white or as per tour ceiling rather than accentuate the highest perimeter moulding, you don't want yo draw attention to the highest detail not being high! Secondly, to make the room feel fully addressed the window has to be looked at in context of your room. The house style is important, but more so the room space and light. As you have a verandah you probably have in direct sunlight, but the room is not large, so i would try to make the window feel part of the bigger picture rather than contrast with it. Which is what the red does, effectively looks like a red rectangle dominating a small wall. Do the opposite, taking colour cues from the room will make it feel unified, therefore bigger. The caramel carpet, for me is where I would draw upwards from. I suggest a rattan roman blind, the texture and stiffness will resolve that terrible sag, let in diffused light and provide a natural element needed in country style schemes. It allows the scenery to stand out, and colour is easily built upon it. If you need further blackout, you can install a uv cheap roller blind within the window frame, which would be hidden from view by the roman blind, so it can remain up most times and the roman can frame the beautiful view, allow light and then use the roller as your night privacy blackout blind. Most Romans look best as a frame treatment, they dress the window better than they function on them. Shutters would also be stunning with their play and filtering of light, but costly. And just a tip, your bed would feel far more luxurious in that space if it were not heavy in colour, the metal and timber, both which are not genuine as in fake cast iron and artificially stained orange pine date your space, that is not a dig, just an observation. You could do an upholstered bedhead for a luxurious look that a linen would tie in with the soft furnishings, you can address colour in many ways, but the blinds, carpet and bedhead should be neutral unless you can afford to upgrade often?.. A layering of texture and tones rather than colour is far softer in a country space, that's why it's done often, creamy whites on a caramel carpet will really brighten and freshen that space, , timber lamp bases, fabric shades, plush pillows and personality pieces, you'll have a space you can't wait to get to. I hope this was helpful!

I agree with Luke there , some wood can break up large white areas to good effect. We are building a small houseboat too and white will be the dominant back drop to keep things light and airy . Our wooden vanity top in the bathroom ( recycled Tasmanian Oak flooring ) is what we used. The seating was treated in a similar manner. A work in progress. This will be similar to our kitchen area.

Hi Tina, thanks for posting, it is all looking great. Shame about the panelling, but sometimes these things happen for a reason. It is great the armoire matches the doors so well when they are all on one wall, but I don't think you need to have the bed and side tables matching, especially when they are on another wall. My issue with painting furniture, while I love it, is the maintenance. It does chip over time and becomes one more thing to paint. I don't know what the timber is in your furniture but another possible option, especially to give you the coastal vibe is to lime it. To do this successfully, you will need to sand all the existing stain off it and go back to the raw timber. The darker the original timber, the less limed look you will get so bear that in mind too. I did an old bunk bed up that had seen better days, for my grands bedroom. It was a dark red wood, but with 4 coats of stain I got the look I was after which was that driftwood/coastal look. The whole thing looks totally new again. Sorry I can't post a photo as this function no longer works for me. Have a look at the Feast Watson range of liming stains, they have some gorgeous soft colours as well, but they let the timber show through rather than having the solid painted look. It is a very easy product to use, it dries quickly - I did the 4 coats over 2 days effortlessly. The hard work is in the sanding.