No to the grey - your wall seems to have a green tinge in them, so I would say either green/grey or a warm white tile with darker grout. If you choose the right grey/green, it is a classic look so shouldn't date. If you are a bit scared to choose colours, why don't you get a couple of warm white sample tiles and put where the splash back will go. You will soon see if it looks too stark....(maybe another idea, but possibly not a good one - why don't you see if you can put a few pages from a blank sketchbook in the whole area where the splash back will go (not super white white, but a warm white). That could also possibly highlight how stark (or not), the white may look. I can see what design tank is saying, as your cupboards appear to be more cream than white in the photos and if this is the case, then I agree the white will most likely look too stark. My cupboards in kitchen were white (but a warm white not a cool white). The stone bench tops also have the little speckles of stone in them..I can't remember the colour Ocean foam/Osprey.......but even with those colours and them not being cool whites, I thought the white tiles looked too stark against them. I therefore went for a glass splash back and ever since I then went to think of designs for my bathroom renovation, I constantly regret going with the glass in the kitchen and modernising the house too much..........definitely don't do glass if you are wanting to keep a classic charm to the house. In a long winded way, I think yes, I also think you should just stick with the grey/green. It will make a statement. Not the right shade...but another example....it may be hard getting the colour of the tile exactly right given that the walls are already painted and the tiles need to match.

We have installed wallpaper behind glass splash backs on many occasions without any problems, the glass usually being attached by a thin beading of clear silicon applied around the inside perimeter of he glass, then fitted the day after the wallpaper install. MOST importantly the INSIDE of the glass be kept perfectly clean on install as even fingerprints will stand out

Hi Jacey Eve, How is your splashback coming along? We are the manufacturers of the Pressed Tin Panels product (yes we sell it too - but believe we know what we are talking about- most of us who work here have a pressed metal splashback at home too!) I believe the great responses have covered what we would recommend for the panels as a splashback and that is the powder coating. It makes them a non-porous and easy to clean surface as well as a long lasting, good looking surface. With basic care it will remain that way for many,many years to come. We believe it is very competitively priced and an easy DIY product to install. If we can provide you (or anyone else reading this) a sample, prices, details of stockists, an install guide or a quote just let me know mardi@pressedtinpanels.com Visit our website for more info and ideas: www.pressedtinpanels.com Regards Mardi

We did pressed metal splashbacks on a display in a kitchen showroom I used to manage, and as such many of our clients opted for the same look. Powder Coated is definitely the way to go. It stands up really well for durability and is in fact relatively easy to clean compared to many splashbacks. Often people think that glass or stainless steel are the easiest for cleaning, but due to being such a flat reflective surface they show up every splash and if you're going to clean them you really have to clean the full length of splashback. The textured surface of the pressed metal means that it doesn't reflect the same amount of light so you are able to get away with cleaning it less often, and you can also get away with just cleaning the dirty area rather than the full length. The biggest difficulty we found was getting the splashbacks installed as there aren't really any tradesmen who specialize in fitting pressed metal, and those that were willing to cut & fit it were concerned about what would happen if they damaged the paintwork. We had the panels cut to size first before they were powder coated to minimize the risk of chipping the surface.