Hi Barry, I personally don't think the large blank space lends itself to a piece of art. It's up too high and contrary to your thoughts, it wouldn't be the feature you'd hope for it to be. Besides, the money you spend on a piece large enough, would be better spent on a smaller, higher quality piece mounted at the correct height (eye-level) that would compliment another part of your home. Getting back to the blank space, have you considered using a timber veneer for the wall cabinets? Something that would work with your bench, and then you could use the same veneer as wall panels to continue above the blank space over the cupboards. Perhaps you could even incorporate led strip lighting to give it a little more wow factor. Timber is great because it adds a layer of warmth to the polished concrete and dark cabinets. Good luck, and keep us posted! Would love to see which way you go. Cheers, and have a great weekend. Steve

Hi, our fridge sits out about 20mm (the depth of the doors) just enough for the doors to open fully. You'll need them to do this if you want to get your shelves out to clean. I don't mind it. It's not an eyesore. Also, from looking at your fridge it's got an icemaker or filtered tap. Make sure the cut off tap for your plumbing is accessible from the cupboard next to it, preferably next to the powerpoint. The last thing you want to have to do is pull the fridge out to turn the tap or power off. Mine is accessible from the cupboard above the fridge. Hope this is helpful.

i suggest 1200mm is the minimum along the length of the island and 90cm at the ends (providing the island is less than 90cm deep) but it really depends on the size of the island and the rest of the room

i don't understand all the concern..(obviously won't be cheap or easy and probably needs an engineer to design the frame) but the firebox probably weighs no more than 200kg (less than a bathtub full of water and a bather) and the flue is suspended from the ceiling or a power flue can be directed through the wall or floor ..the challenge will be finding the most suitable brand and model (preferably zero clearance) and keen tradesman to organise the steel frame as the timber shelves are only decorative not structural ...we have a 250kg corten steel courtyard gate that is only suspended from steel hinges and they not only hold the weight above the ground the door also has to move...consult the manufacturers who should be able to give more specific advice