How funny. I just renovated (on a budget) my small kitchen and added exactly the slate look in tiles you have, though they are in fact porcelain. And I placed them throughout the house for continuity. The tiler asked if I was after a retro hippy look but it doesn't look like that at all. My cupboards were the same colour as yours and I utilised the bones of the kitchen and had the doors and Benchtops changed only. I also have plenty of light in the kitchen but chose white doors and as I was on a budget I chose granite look Benchtops, they are very serviceable and it looks great. The blue backsplash was the colour lift and here you could choose any colour to your liking. Basically the kitchen ended up with white cupboards and appliances other than cooktop, with the stainless cooktop and coloured splash back being the focal point. The paint colour are: whisper white walls, integra splashback, white ceiling and for increased contrast I used the same white above the splashback on the rear wall. I would consider painting out the brick but leaving the texture.

It would be much more cost effective to work with the slate. Image sent by mazgardiner looks great. If the home was purchased for rental purposes, the plinth could be painted white, benchtop and splashback tiles painted (much cheaper than replacing) to blend in with slate colours. If you are going to live in the property, sometimes it's best to live with how it is and replace later when you have better understanding of what you want. Good luck with it all!

I will be the loan naysayer and go: Vinyl Plank timber pattern tiles. I did these in my kitchen and they helped make the room. Used Karndean, but any European brand should be fine (avoid American and assume they are using American or worse if they don't say the country of origin). http://www.karndean.com/en-au/floors/landing-pages/new-looselay-longboard?gclid=CjwKCAjwspHaBRBFEiwA0eM3kQ7eEFPH5FlK2IwV3o7ZsbbmJ19srG0OM_tWK5dhPMNyDdwxGPUr4BoCoYcQAvD_BwE Caveats: Ground must be FLAT. 100% flat, ruler FLAT. If not you will have to level. If flat, you can lay them yourself. Our floor had to be levelled and it was tough. still got a few high patches and gaps because of that. However I have done it on a concrete surface myself since and it's beautiful. Benefits: Nice and soft on the foot. (less ankle pain) single tile replacement. Looks fantastic. No PVC glue fume issues and fairly resilient. Do be wary though of metal chair legs scraping the floor. Waterproof! when installed right with no gaps! (why I would choose them in a kitchen over timber or Eeek carpet!.... Yes previous owner installed shagpile carpet in the kitchen).

Dr Retro, you are a designer after my own heart! My triple fronted brick veneer house was built in 1965, extended in 1970 and I try and stick to furnishings and influences from the 1950s to the end of the 1970s! I am its third owner, but have discovered its history via my elderly neighbours. I also have lots of antique vases, crystal and fine bone china, as was popular in the 1960s and 70s in my lounge room. Cannisters in the kitchen are all straight from the 1960s purchased by my mother, then handed on to me. Meanwhile my sun room is an explosion of plants , cane, colour and knotted pine feature wall. Whilst I have double glazed and slightly tinted the lounge room windows for privacy, I try and maintain the period integrity and hope to heritage list my property. So many glorious homes of this era are being knocked down for building town houses and macmansions, especially those on huge blocks, like mine. It is an easy house to live in and I am grateful for my separate kitchen, with easy access to the open plan dining room and lounge, as it keeps my dog out of food preparation areas. I love the cosiness of my kitchen in a home of otherwise vast spaces too! The separate living areas and kitchen have at times, made it easy for 3 generations of the family to happily coexist here, which in a totally open plan home would have been difficult!