A sliding door is just a big window, and if correctly built in (check if the glass is the correct sized for the door if a bit old) with the correct sized lintels this should not be a big problem as the loads would be transferred to the sides, allowing the door to slide easily. Silicon spray (being a Yachtie were we use this stuff everywhere), we now use silicone spray on all our windows in our 1930 home and the windows glide across with one finger before they used to tilt when trying to open them. I would place the door head up to line up with the others and one thing you might consider is placing a window seat, (rebate the bottom channels into the window seat) and have the window seat in and out, place a cushion over the entire seat, should be fantastic and if the deck is built, than no balustrade is required. If it is a stacker slider, i would do the seat for the entire length. So instead of looking a bit funny they will think it was supposed to be like that. We should all think outside the square more often. RAM

About your question about sourcing some of your own internal fittings. It is best you discuss this with the builder early on. Usually, the builder's contract will specify an allowance for particular fixtures. However, some may specify actual brand and model of fittings ie taps, toilets, sinks, etc in their quote, and they may or may not allow you to vary this. IF you are happy with those specified fixtures and you think the allowance amount is reasonable, then you can go with it. Otherwise, any changes or variances need to be discussed with builder, and it is very important this be discussed upfront and before any contract is signed. Some building contracts may also disallow some variances. In any event, carefully read the contract so you completely understand what you are agreeing to, and discuss any and all parts where you are not in agreement so these issues can be ironed out. Also, and this is my own experience and opinion, but I advise specifying in the contract the completion date AND if the build is not completed on time then what happens (consider that you may be paying interest on your mortgage, be financing a bridging mortgage, etc. and/or you may also have already sold your home and then have to pay rent until the build is finished). If you are in agreement with builder to source some of the internal fittings yourself, there are any number of suppliers and sources to investigate, and this might be a good way to keep your budget in check. There will be Houzzers who are experienced at this and can provide you with ideas. Just keep in mind that you will have to have all fittings READY and ON SITE when the tradesmen require them, otherwise you will be holding up the build and that is going to cost YOU money.

Thanks for all the detailed comments! A few clarifications from me.. We have done the BASIX and so, really, the window size, shape, location is determined. That wasn't clear of me, sorry, I guess I meant we can change the dimensions (within reason) to suit if a "standard size" is cheaper than the size that we have currently, which was rather arbitrary. But this way of thinking might be totally irrelevant! All the windows/doors penetrations are blocked out when they pour the concrete panels, so while we could infill or something if the penetration is too big, we are really trying to get it right now so there are no breaks in the concrete. I think we also did the BASIX with double glazing and Al frames originally (will look it up) but as we are off grid that kind of blew everything else out of the water. We have done all the shadow diagrams and spent a lot of time with placement and eaves. I think that part is OK. I am pretty set on double glazing and thermally broken frames (where aluminium). Thanks Paul for your comment of 10-15%. Our preliminary quote from out builder is certainly not that high (more like 5%) and I was having trouble seeing how we could get everything for that price. I am sure it is possible, and while we are very conscious not to over-capitalise, I don't think the most basic product is a good idea. oklouise, I share your concerns about bifolds! I don't really like them but my partner really wants them and I'm happy to give on that one. I have one quote from CedarWest which seems reasonable, but then it's the same again for an integrated screen!! Will consider other ways of doing that. So! More details: See attached the overall floor plan (floor plan attached twice, sorry!) and views. Great 270deg views (all but west as sort of dug into a hill to avoid the wind). There are 2 pods connected by an open walkway. Ignore the round window - point of contention and may change. The main pod has two large east-facing windows. A thought was gas-lift windows with the large bottom sill to serve as extra seating when open. In the E view, the verandah will not have that many posts so the view is not actually obstructed. Any ideas are greatly appreciated! I think I am just struggling with all the choice, and need to start pining down some constrains that I can work within! Thank you!!

You will need to look at how blinds will clear the door handle if recessed in the frame. There may not be enlightened space. Also wi5 the big door you will need to break it into two or maybe three blinds due to weight of a long span. It’s much easier to pull up a smaller blind which outweighs the negative, no pun intended. I’d look at white, But a pale green or blue may also work particularly if you can echo the colour in cushions, rug or artwork. Get the blind company to bring you samples.