Hi Joaney & Lainy I also use only windex on all my bench tops. The granite I had before was a white with a few burgundy streaks and gorgeous highlights through it. Can't remember the name, might have been River White but not sure and I found nothing stained it at all. The marble in my bathrooms I have now look very expensive and impressive but I know every single mark on them even though a visitor mightn't pick them out. In my kitchen I now have Caeser stone and if you want a virtually indestructible bench top this would be it. I have blackbutt timber floors and as they have a lot of color, I chose all white in the kitchen with just a tiny fleck. I just love granite because of the beautiful grains you get running through it.

Hi I just thought I would leave a comment about the visibility of joins in reconstituted stone such as Caesarstone tops on islands longer than 3 metres. From a patern point of view; by selecting a style that has a fine grain certainly helps with reducing the visibility of a join. As for the join itself, the technology and tooling used to make such joints has come a long way in the last 10 years; therefore if you use a Kitchen Manufacturer who uses up-to-date stone fabrication methods, then such joins can be next to near invisible. Below is a kitchen we made with an Island that is over 4.3 metres long and has a join through the centre; where the join actually has to be pointed out to be seen. We have seen Kitchen Manufactures use the two height method but you really don't have to do this to achieve a long island. If you would like a long island, then you should not be put off by having to have a join; careful selection of your material, manufacturer and planning can achieve great results. Hope this helps anyone reading this article and the comments above.

True, after 13 years our timber floor has collected its share of stilleto-heel dints, dropped-items dents, dragged furniture grooves and lots more (despite really trying hard with pads under all chairs and tables). One day we will simply have it sanded back and re-laquered. I would never change for tiles or any other flooring, though. You can't beat timber for comfort, temperature, appearance and above all; not showing every speck of dust. We did the same with timber benchtops in our previous house.

Hi Karly, We're loving what you have chosen so far! Although, we all have different tastes and styles - we are leaning towards Linen on this one. http://www.caesarstone.com.au/colour/2230-linen With those stunning rich Kempa floors, a warm neutral colour like Linen would work best. Contrasting white cabinetry - looks like you're onto a winner! Best, Caesarstone Australia