@ sally wastie....Would have loved those pine kitchen cupboards....before they were painted. Had I a strong yen for :a bit of colour"...(and I do love colour), I would have had a new glossy multi coloured counter top, probably something very striking and then oiled the pine cupboard doors There were no work benches in the kitchen of my 1920s all pine cottage ( always say that the kitchen was an afterthought since it is positioned just of a hallway and consisted only of a sink and a wood burning stove.) I built a small bench/table using VJ pine slats I'd removed from elsewhere and then put a thick pine top that curved out from the small straight bench to form a little round kitchen table..Then came the fun, I painted the benchtop and table a datk teale colour, gave it a flecked faux marble finish and a couple of coats of high gloss waterproof varnish. Nothing terribly amazing but it did give the old...'kitchen space' a bit of a lift. Had a larger round kitchen table with a formica top and timber legs...so gave the table-top the same teale treatment as the bench and it now lives on the veranda that came a few years later. Yes! Teale of any shade always looks good with timber. The only pity was that the kitchen walls and ceiling here were terribly smoke stained and had been painted a really horrible pre WWII green. Begrudgingly, I repainted the walls but used a bright orange/yellow to complement the dark teale colour ( this particular yellow is a good colour to keep the flies out) and, in keeping with the era of the house, I installed a built in dark timber kitchen hutch found at the dump shop. The kitchen is the only room to have been painted and repainted....but still have the dark timber parquetry floors. If you get tired of all timber a few splashes of bright colour in well-thought-out places do not go astray. If you have vertical timber panelled walls and you are feeling hemmed in... a good trick is to stain a small section of panels a darker wood colour or with a coloured stain to shift the focus from all the timber. or you can bleach the timber panels lighter. This idea can create interest extending ceilngward from behind a furniture piece...say low display cabinet...or just in a section of wall. You enhance the all timber 'look' with an eye -catching timber panel of another timber hue...like having a mahogany panel set in a light timber wall... Just a few ideas for those feeling a bit claustrphobic in an all timber house....understandable, not all of us aspire to live in a log cabin...but if carefully accented, an all timber interior can be extremely impressive and will not date. This is a pre-digital shot of the glass panels I had installed in the wall around my bed head...its really faded PIC but you can get the idea. Looks better today since the glass has been decoratively frosted with patterns. The sunroom behind the bedroomThis is also a pre-digital PIC showing the little timber kitchen bench with the teale table top. The end and other side of the bench is stained timber. This little table seats 3 or 4. Pity you can't see the old parquetry floor here. Old formica table given a lift with a Teale coloured painted top...there's no room for it in the ' kitchen space'. Amazing what a little lick of the right colour can do in an all timber house.

Very unique. Hope you found it!

I've been playing around with a pantry location. Originally, I was going to move the pantry into the laundry with some custom shelving and cut the laundry space in half. Now, Im thinking of cutting into the study area and building a wall there, and converting the new space into a long and narrow walk in pantry. Either that or build half a wall and put built in shelving in the study. Building the extra wall will reduce the need to cover in the door way that is currently in place and instead utilising it. Thoughts? p.s. this isnt too scale.

Hi Badobbs Structafloor will only span 600mm unsupported in the 22mm and 450mm in the 19mm version so no, it alone won't fix your issue. A simple fix would be to pull up the floor in the affected area and then 'pack' it up to level, THEN lay some structaflor over the new supported sub floor. This is done by getting a laser level and marking out the low points in the joists then making up packers to suit, or installing a packer and planing it down to suit. It depends on the level of dipping. It will be your cheapest option and definitely a job for your carpenter (unless you're handy). Regarding disturbing the floorboards that is nonsense. If there are other issues such as other sagging floorboards then you can address them at the same time, or fix them down properly with screws. I suspect that the real issue is that the wall removal did not take into account that the floor joists are usually fixed to it and they are now unsupported. If you get under there and find issues with your joists/bearers then it is not a big deal to install a couple of stumps/connect bearers to support them whilst it is open. We do it all the time. Either way laying a new floor over a subfloor without addressing it would be a waste of money and will degrade your new floor. Cheers