Ahhh, that happens. :) Do you have a photo of the fence as it exists? That may help get some ideas going for you here.

Kerrie, I live in Victoria and my pool in completely internal, that is to say it is part of the house and not an addition to the house. I planned to have an external door with the required regulation lock height and seld closing mechanism. Hubby was dead against this door and so I agreed to have a window instead, not long after, we found out that the laws had changed and you are no longer permitted to access to an indoor pool from the outside, so it was just sheer luck that we changed the door to a window. Further, when we purchased the awning windows (2) with regulation restricted 10cm windouts, our building inspector tried to tell us that the windows weren't allowed and that they would have to remain shut and we were also going to have to concrete "bars" into the brickwork on the outside. I argued that regulation pool fences had the same 10cm restriction and after contacting the Victorian Building Commission, I have confirmation in writing, that the windows are deemed to be adequately safe and the inspector has accepted the finding. My access to our pool now, is only from the inside of the home obviously and if that becomes illegal, then we'll just have to sit and look at the pool longingly through the window, as there won't be any access at all ha-ha I'm not advocating that people argue with regulations but if I hadn't investigated my options further, who knows where I would be, having spent $1,500 on these two windows with laminated glass and how beautiful would my brickwork have looked with prisson bars attached. Cheers, Barbara

Yes thanks everyone...I went with stainless and fence is now installed and looks fantastic...I'm happy to say the above comments about other elements reflecting off the stainless is absolutely true..I can add a pic tomorrow in the daytime if you like to see.

Hi All, well I've been test painting for days and still so unsure. I think the hardest part is deciding on the gutters etc. In the top photo you can see from left to right. Dune full strength, then Jasper at the other end of same gutter, below that is a white called Surfmist and then there is monument on the lower gutter. I quite liked the monument on the gutter but when tried on the wooden fence it was clearly going to be too much darkness and didn't look good. I'm currently trying Jasper on the fence and other areas but its really a brown colour and again over a large area not sure its going to look all that nice and maybe too dark. When trying lighter colours, white and off whites on the trimmings they looked far too start on the dark roof so I think white/s are out for gutters. Can you have a different coloured fence (wooden panels) to the trimmings on the house? I've been assuming they need to match. I'm fairly happy with half dune on the walls. Any other suggestions for trimmings or thoughts on the colours in this photo? Its doing my head in now!! Second photo was house with lighter colours on the gutters - surfmist and dune I think. I tried a vivid white but it was crazy wrong.