I will start with an admission - I have read nothing of the comments. However I have helped a friend design a compact laundry. Here was how we did it. 1. Start with a list of everything - and I mean everything, include pegs, those little lint ball things for the washing machine, buckets, mops, vacuum, airers etc - that you want to store in the space. 2. Break that list into where you want to store it - drawers, wall, or cupboard - and then rewrite the list as cupboard, drawers, wall etc.As you are doing this, see if you can store those items elsewhere - we added a ceiling airer in the bathroom using pulleys. Also mark any item that a special storage gadget might help. We added to the back of one door (I think they were custom made 925mm and 2300mm high) a hanger for the vacuum hose, and in the cupboard a hanger that slides out for the brooms and mop. 3. Go measure the space you have, and be exact - if the measurement is 1457mm it is 1457mm. Also, see where you might "borrow" space from. We managed to add another 650mm deep, 750mm wide cupboard by swapping the two bedrooms around, and using space in the guest bedroom wardrobe. 4. Draw up a plan, and be really specific. If you think you need four drawers and a top mounted sink then plan that way. Whilst you are planning think over whether you want top spec and not hide it, or to hide it behind really nice doors. We used reasonable quality from Bunnings and modified because it was behind doors. Also, don't be afraid to "borrow" something from a different zone. In my laundry I used a round kitchen sink, because I didn't want a really deep laundry tub so I could use the room underneath. 5. Go and find a really good quality cupboard manufacturer or builder and ask them to look over your plan and ideas. They may tweak to assist, but remember you know your space and what you will be using it for better than anyone. In my friends case, she had a brother who assisted and made a super looking set of doors. As to resale value, that depends on who you want to buy it, but I have one piece of advice - don't go for the resale value, do it because that is what you want. In my friends case she turned her laundry into the bathroom, and then turned the oversized bathroom into a very natty study. Good Luck.

Thanks everyone for all your feedback and tips. Below is the plan I have come up with. Not sure how clearly it will show up. Have wrestled with the position of the ovens and sink - thought about swapping them and about having them centred but then think there would be too far between fridge and cooktop/ovens. Cooktop is 600m gas, then two below bench 600mm electric ovens, 900mm rangehood. Sink is double drain, double sink (1550mm in all). I know this seems excessive and against trend but I could not live without my double drain as always defrosting meat, bottles of milk etc and like to have one clean side and one dirty side of the sink. I love the idea of a bi-fold door appliance cupboard for toaster, kettle, microwave but not sure how practical it really is. Will the doors when open be painful and stick out near the fridge???? Do like the idea of having all that stuff tucked away though. What do you think of dishwasher position? Think I will make that gap between island and bench with dishwasher 1300mm as suggested. The only drawers I'm planning on having are a bank of 3 x 3 800mm in the island. I know that are more economical space wise but trying to keep costs down. Should add that behind the L-shaped benches will be windows as much as possible. Looking forward to your feedback. Thanks greatly.

Ceasarstone recommend that you do not use their products as a splashback behind a gas stovetop unless you have a 200mm gap between the edge of the stovetop and the splashback due to the heat. If you change to an electric or induction cooktop then this distance can be reduced to only 50mm. If you are using a stone-look benchtop, such as the ones that you have mentioned, I would NOT go for a stone look printed on glass for the splashback as the reflectivity is higher with the glass and it will look fake. I would suggest tiles or a glass splashback that is a consistant colour, possibly matched to the veining of the grey in your benchtop which will complement your benchtop (which is the feature of your kitchen), and not distract from it. Matt black tapware and sinks are very on-trend, and when the fashion passes in about 18 months they will start to look dated. Classic chrome and stainless steel is timeless, so your choice really depends on how long until you put your house on the market... Best of luck with your kitchen, Dr Retro of Dr Retro House Calls http://www.caesarstone.com.au/Portals/0/Documents/2017-Kitchen-Splashback-Guide_Web.pdf

Before Now We opened up the wall to make a walkway. Basically, closed up that laundry door near the bathroom. So now the way through the back entertaining/pergola area is through kitchen/laundry. And when you come in through the front door you no longer see the laundry but a nice recessed feature wall. Where the ladder is, that will be the pantry. I would've liked a bigger pantry but the builder made a mistake measuring and we lost 100mm. Basically made the recess bigger. But was too late as wall was build. Also, would have preferred a french door or sliding door rather than a window, but it was too much to do and we didn't want to sacrifice the space Since we couldn't make a french door to replace the window we opted for a servery window instead. I'll update again when we've got the cabinets and everything else.. Thank you so much for all your wonderful ideas. It really helped us create our dream 🙂