Post in design dilemma

I too own a Qlder and found it difficult to choose exterior colours. But I do think you need to keep the handrails the same as the other handrails - blue. The balustrading needs to be the same as the other - beige. I think if you want to put the red somewhere, put that on the actual steps and decking on the door level.

May I suggest that you look up the NCC Volume 2 which specifies the safety design parameters for stairs and balustrades. Any new work done on stairs and balustrades must comply with the code. You need to look up sections 3.9.1 and 3.9.2 In summary, whatever method you look to you can't be able to pass a 125mm sphere through any part of the stair or balustrade. It also specifies the design parameters for wire balustrades to achieve the 125mm sphere rule. The design challenges for stairs are significant if you want the open back tread look. The easiest way is to install a block on the underside of the tread level with the back edge of the tread below. This way you can still have an open tread and achieve compliance. The harder problem occurs when using a wire balustrade and the resolving the gap that occurs between the treads and the lowest wire. I have seen several installations of late where the 125mm rule was very clearly not achieved. One was a very recent build and I'm still not sure how it passed the final inspection. The images from Miami Stainless show how this can be achieved. Clearly the best and most secure is the glass balustrade and the vertical bar balustrade. Good luck!

yes oklouise, I hear all that - absolutely yes it's all about clients understanding/working out properly what they need.........and it's great to be able to seek comments/thoughts on Houzz from a broad range of backgrounds/experiences......the issue though is when it gets into territory where (from my perspective) clearly experience and professional skill will help resolve the problem most effectively (such as on this particular one) that it's therefore appropriate to suggest this the advised way to go.......I suppose I see frequently here capacity for designers to be able to "cut to the chase" most effectively, but of course this needs to be done in a manner underpinned by a thorough understanding and establishment of what the client needs in context, and yes very often the client will require more time to work this all through.........I however still see our role as relevant in that part of the process though, and not necessarily having to "wait" for that to happen, because ultimately as professionals in this position (i believe) have a responsibility (as part of our role as a consultant) to educate people appropriately and thoroughly so they can develop the skills to be able to consolidate their decision-making most appropriately for themselves and the project - by the end of the journey, I find my clients are rather quite the experts!..........this however involves a collaborative approach, egos are shelved and an intimate working relationship, which is very different from the approach (that some designers work to) which is essentially selling a "product" or particular end result, rather than a service....significant difference, and again, horses for courses ;)