Hello, the way to make the room feel bigger is to take out the ceiling up to the roof line and add an openable / remote operable roof window. Look at Fakro and Velux web sites. A bit of structural work to do in the roof but well worth the effort to achieve a light filled ventilated space. Ideally a " wet room " with no timber products and all stainless steel fittings. No chrome on base metal otherwise they will corrode in no time. If you can try and break through walls for the wall cabinet if there is a cupboard or robe behind this is also a space saving method. The window can be pushed out in a bay to enhance the space. Have not read much of the above but importantly remove all tiles, do not tile over old tiles. Waterproof the shower area walls before tiling. Don't take the glass shower screen to the floor, leave a gap and stand the glass on a stainless steel balustrade foot. Angle or channel fix the other edge to the wall. No need for a door on a wet room. Vanity cabinets are available in plastic but change the screws to stainless steel. Ideally no base cabinet and have a wall recessed cabinet as mentioned above. Don't think outside the square, think outside the box. Innovative design ideas from William Hall 628 drafting Darlington Perth WA

Hi Reham Arnaout Generally the darker tile is better on the floor for the reasons mentioned above (not show the dirt etc.) and because it has more visual weight to 'ground' the room. Think about the natural light the space receives- too much dark tile on the walls will make the space dark and gloomy. Some light wall surfaces will help brighten the space. Best wishes

Hi, since your kitchen is small and there's a lot going on I would go with a very light coloured back splash. A very light warm grey as suggested could work nicely here. It would also brighten up the area a little. I certainly wouldn't introduce yet another colour. Introducing something like a bright red will draw attention to the backsplash area, but the design of the kitchen doesn't lend itself for such a high impact visual focus. Keeping it calm and neutral will make the kitchen look more like a unit rather that bottom and top cabinets with a big red/black/maroon stripe through it. The company supplying the back painted glass should either have a range of available colours to choose from, but usually any standard RAL colour should be available at a minimum. They will most likely have the RAL standard colours fan available for reference as well. I'd go with the one of lightest warm grey shades that is in the standard range. Your worktop has warm tones in it, your wall is beige, going in with a cool grey will make each colour look "off". The last thing I'd recommend is black. I know it has been mentioned, but it is just too strong of a contrast and non of the other materials and colours would support such a stark, contemporary choice. If you are worried that the existing dark red paint will alter the colour of your new glass back splash, and that's a very valid argument btw, just paint it over with two coats of white prior to installing the new back splash. I'd do that a few days prior to installing the glass to make sure the paint is nice and dry. In terms of maintenance a glass back splash is probably the easiest to look after since its so easy to clean and there's no grout that can attract dirt over the years. Good luck with the renovation :)

Well, I had a structural engineer come to the house yesterday at a cost of $600. I thought I would get drawings or something for that price but this is what he said.....(oh, before his visit, I cute into some of the plaster of the dividing wall between kitchen and lounge and the brick wall goes all the way along the wall). Structural engineer said that the wall is load bearing because he think that it provids support the support rafters (or what the horizontal beams that are at the bottom of the cathedral ceiling). Those horizontal beams that go across the house (each one from back to front of house) and partly supported by the brick dviding wall. He said that if I totally removed the overhead walkway, I would still need to leave a post or some of the brick on either side of the current dividing wall , as well as a support beam between them. He said I could cut out a window into the wall, but the bigger the window the bigger the horizontal support beam would be required. He said he didnt like working with brick because it was not like timber etc, where you can calculate what load it takes. He said there can be a lot of variation in a brick wall. He said that I should contact a building designer (someone who can give an idea of design whilst also consdiering loads and being able to draw plans...he said normally, those people will ask his advice on something). I hate tryin to do renos, because you can spend a lot of money and not really get much from it, and also go in circles about knowing who is the best person to contact. I know I do need someone to help give me an idea of design, but someone who also takes into consideration comparative costs including structural elements/loads etc. When I said to him ..so I shouldnt see an architect, he said that he often sees things from architects with no technical drawings...just design only. I really would like to be able to see the view at the back from anyway in the house, but I am a little bit reluctant to move plumbing, as I imagine with a concrete floor, the costs will start to rise significantly if plumbing has to be moved. I tend to spend most of my sitting outside time, at the back of the house, looking at the lake...even though there is only 1.5metres from the back of my property to public land (and that I have to put fencing up there to keep my dogs in). It is only me and my dogs at the place, but I do want to make sure that any changes that i make are family friendly and AirBnB friendly. The exisitng laundry seems to have heaps of wasted space in it and because the current windown is so high in it, it seems to be very segregated from the outside pool and not in the best place. I dont know what to do with this place.