Yes, our harsh Australian environment does hammer our external finishes but if exposed timber is coated with a good quality finish initially ( i recommend 4 coats minimum ) then an ongoing maintenance coat every couple of years, your timber can still look great many years down the track. People just need to understand if you want that beautiful natural timber look you have to put time in to maintain it.

The weatherboard look suits so stay with that but maybe a recladd in an FC Weatherboard. Have a look at Scyon Linea. Which is a high performance version of Fibro Cement. Also use some architraves around windows and doors. A repaint will make a big change. I'm not a fan of blue blue I'm more a grey so look at 'Windspray' or 'Timeless Grey'. Paint the new architraves in white or 'Shale Grey'. One other change I would make is landscaping. Have a professional do a design for you this where you'll really make the property your own.

Hi all, Sorry for the slow replies and thanks for the input so far. From what I've read online a re-inforced besser block wall should be about $600 p/sqm including footings in Sydney (Hornsby shire council area). Given the wall is 1m x 10m it should be let's say $7k including design and DA or am I way off? I'd also need to dispose of the current wall + footings but I could probably give the blocks away. The paved area is about 40sqm. Would it be safe to assume $200 p/sqm for concrete base, paver supply (travertine) and install (coping and surrounds)? So the wall and and paving would cost let's say $16k + fencing + cladding. This isn't too bad considering how much better it would look and the value it would add to the house. I like the flexibility the besser would give - render, cladding etc are all options. I'm not sure how bad it is structurally it just has a couple of spots where I can see the blocks have pulled apart over time. Below are some pictures of the bad spots. Also looking at the Amber website it says the maximum courses is maximum non reinforced wall height of 972mm (6 courses). It looks like my wall is actually 7 courses un-reinforced. The wall and pool was built back in 2003. I definitely think planting in front of the wall would help, as would removing the lights but I'm in two minds about whether to bite the bullet and do it properly or just hide it.

Look at 'Iron Ash'. Its a treated version of what you're after. Don't know anything about it but seen it recently on the web. Overall avoid Merbau as mentioned above, as well as being an imported 'sustainably' managed timber.... Use local product's when available as they're manufacturered to high standard's, supporting local job's, companies must meet tight regulation's, etc. unlike other countries....