We had a house with a timber ceiling - it is a tricky decision. If it is a cheap display home build perhaps cover it, but if the quality is good it is a much harder decision. I think it looks good now and could be made very interesting. Also that look is "back". Make sure your lighting is very good and the heaviness will dissappear somewhat. The floor is lovely.

Sounds like you've made a decision not to cover any of the brick. Just to answer your question - the masonry adhesive is applied to the brick surface (not the Gyprock) in blobs approx 450mm apart. It sets pretty hard so to remove it at a later time you'd probably have to chisel it off. Any residue left in the surface of the brick could be touched up with brick coloured paint. Apparently you can also use cornice adhesive. Same way of removing & hydrochloric acid would remove any residue.

I really like the ceiling, as others said it gives it atmosphere and frames the view. When you say pine, I'm thinking you mean the finest of all the pines - Oregon which is fine grained and a warm honey colour. I have a cathedral ceiling and I would gladly swap my bland white faux Hamptons look with you any day! I would look at a large rug for the floor - if the budget is small, find a carpet that you like and get it edged as a rug - my favourite hack. I agree to bring in some black in the curtain rods and swap out al that cream/yellow paint for a neutral white. Your kitchen reminds me of mine circa 1998. Change the splash back to something neutral. Even white painted glass or a white textured or interestingly shaped tile. Swap out your bar stools for timber and introduce some timber elements in the kitchen to match the roof. Think chopping boards,, timber bowl for fruit, utensil holders, pot plants. Paint the walls white as well. All the creams in the world won't help the ceiling look better. you need to work with it not against it. Good luck and keep us up to date!

quite possibly, that was going to be my next solution! heading back there in a moment to check it out. the existing tiles have been layed quite nicely/flat so i dont think tiling over would be an issue