@Neryl, you cracked me up when I read your post ha-ha @lakshmi17, All jokes aside, if you want to go to the trouble of having beautiful pendant lights and your ceiling is so high, get a professional!!! Save up if you have to but it's the best way to go in this case, you might be surprised that it's not as expensive as the cost of the lights you intend to have fitted. I paid over $130 for each of the three lights I have bought to have installed over my dining table and I'm darn sure my electrician won't be charging me $400 to install them!!!

Amazingly beautiful!!! There is another Australian designer called Lighting Republic that does something very very similar, but with a brass lamp holder. http://www.lightingrepublic.com.au/en/collections-en/organic Or see here, its in our Sydney showroom. First photo in the middle http://lightco.com.au/index.php?option=com_content&view=article&id=37 And product details http://lightco.com.au/component/virtuemart/organic-large-pendant-detail

This explanation may help, Source: https://www.renovatorstore.com.au/blog/lighting-and-power-in-your-bathroom-the-simple-rules-to-be-safe/ REQUIREMENTS Zone 0: Inside the bath or shower. Any Lighting used here must have a minimum rating of IP67 (protected against immersion in water) Zone 1: Above the bath or shower to a height of 2.25m. A minimum rating of IP44 is required Zone 2: The area stretching to 0.6m outside the bath or shower and above the bath or shower if over 2.25m. An IP rating of at least IP44 is required Outside Zone: Anywhere outside zones 0, 1 & 2. Where water jets are not to be used for cleaning purposes, the general rules of BS7671 apply In addition to the above, if there is a likelihood of water jets being used for cleaning purpose in zones 1 and 2 a fitting rated a minimum IP65 must be used. Now that this has been explained, always make sure to purchase bathroom lighting according to these standards to make sure that your bathroom is always safe. You should also have this principle applied when you purchase other electrical devices such as heated towel rails, or a guide to where you'd put sockets in your bath for razors and other devices. This may also fix the common misconception that LED lights are not rated for bathrooms. Typical LED lights have an IP rating of IP66 which is more than the needed IP rating standard that bathrooms should have. - Not to mention you'd be saving a whole lot from energy bills in the long run.

I found a similar pendant available, where are you located as most independent lighting suppliers should be able to order it. If not, I can. They are priced at around $899 each.