No to the grey - your wall seems to have a green tinge in them, so I would say either green/grey or a warm white tile with darker grout. If you choose the right grey/green, it is a classic look so shouldn't date. If you are a bit scared to choose colours, why don't you get a couple of warm white sample tiles and put where the splash back will go. You will soon see if it looks too stark....(maybe another idea, but possibly not a good one - why don't you see if you can put a few pages from a blank sketchbook in the whole area where the splash back will go (not super white white, but a warm white). That could also possibly highlight how stark (or not), the white may look. I can see what design tank is saying, as your cupboards appear to be more cream than white in the photos and if this is the case, then I agree the white will most likely look too stark. My cupboards in kitchen were white (but a warm white not a cool white). The stone bench tops also have the little speckles of stone in them..I can't remember the colour Ocean foam/Osprey.......but even with those colours and them not being cool whites, I thought the white tiles looked too stark against them. I therefore went for a glass splash back and ever since I then went to think of designs for my bathroom renovation, I constantly regret going with the glass in the kitchen and modernising the house too much..........definitely don't do glass if you are wanting to keep a classic charm to the house. In a long winded way, I think yes, I also think you should just stick with the grey/green. It will make a statement. Not the right shade...but another example....it may be hard getting the colour of the tile exactly right given that the walls are already painted and the tiles need to match.

My two cents worth would be to extend the tiles to cover everything below the canopy of the extractor (could go higher but that would be the minimum) and use that as your level on the other wall. So you ignore the curved glass (I assume that that's kind of the point of being transparent) and go with the straight edges of the tiles. You certainly wouldn't want a funny little segment of painted wall below the curved glass – it will look awkward and be very difficult to keep clean. My remaining concern is – have you already installed the rangehood or can it be easily taken back down to allow the tiler to do a really good, neat job and then the rangehood can be installed nice and tight against the tiles?

Hi Gavin, We have a bunch of different whites and off white tiles available. Here are some whites: https://www.tilecloud.com.au/white-tiles?page=3 and some off whites: https://www.tilecloud.com.au/off-white-tiles we do 5 samples for $5 delivered to your house so can send you out a bunch until you find the exact shade you need. Always easiest to compare them next to your actual wall. Hope that helps! Drew

Hey everyone, Has anyone seen tiles like this around sydney? I have had no luck Size i am after is 750x750 Cheers