Yes we are replacing treated pine with a hardwood this time but I just want to make the right choice. Still it's nice to hear you are happy with it . Anything will be a big improvement I do like the idea of an Australian hardwood that is from sustainable sources though . I gather it's been down a few yrs and you haven't experienced the shrinkage someone else complained of ? Thanks for the feedback . This site is great :)

Ok here is a photo i just found...This is Queensland Spotted Gum, which is more varient than the NSW Spotted Gum. Friends that have seen it say how gorgeous and different it is...and so so glad we didn't end up going with blackbutt :)

hi we have about six months ago now, re done our bath room , similar size to yours, and , i can take some photos and email them to you , we have maximised space, and walls , put in a white stone bath under the window , it is a metre in width , with a cool water spout coming off the centre under the window we pu t afalse ledge in to sit , candles etc on , , we tiles floor to ceiling, off white , wall mirror cabnit with three mirrors , inset into the wall so its only sits out a we bit from the wall tiles , floating bath room vanity , so that it makes the floor space look bigger , . matching stone square basin sits ontop of the vanity to one side so plenty of room to sit all your bath room stuff when need be , seperate shower all tiled as well , with inset , shelves for shampoo etc, also , when you open the bath room door and walk in when you close the bath room door behind it next to the shower is a very narrow floor to ceiling shelvec for towels, now the hole is there we jaust havent got the shelves put in yet. , we gt loads of comments as the bth room dosent look small evn though it is , , most expensive item the sqwat extra wide stone bath , made to order basin / tap ware and shower spray thing ,oh and the white stone vanity which we had made to order as well , due to the sizing .

I have only seen one wooden bench top that has managed, over time, to keep the wet out and avoid that black mouldy creepage where the water splashes behind the taps and around tap inserts. It was built by a carpenter and then the owner applied oil to gain the colour desired before applying several coats of marine epoxy (several = at least 5), sanded back before every new layer. It was burn proof and the colour locked in by epoxy coat with no maintenance required (until a visitor put a burning pot on it and left it there while attending to fire on stove, still... only left a black ring. That said, the owner promptly got out the sander and ground back until black ring was no longer charcoal texture, then reapplied oil and layered epoxy until black ring looked like it belonged (can't do that with any other surface I can think of?). After 15 years there is no sight of the insidious black mould from water penetration so I suppose it is the same recipe as with most thing successful projects in life, research, research, preparation, preparation, preparation and don't falter at the finish line.