Stair safety (toddlers)
Nick Smart
7 years ago
I am about to commence a renovation of this semi with what I consider a very unsafe stair design for toddlers. Issues are: 1. Wide gap between stair treads and treads not reaching the wall allowing a toddler to fall through the gaps 2. Railing that allows toddlers to climb up. 3. Safety doors that will stop toddler access to the stairs
Our builder is recommending plexiglass for railing and chicken wire for the back of the stairs both being unappealing options. I would really appreciate any ideas you have. This is a temporary solution for 2-3 years. Thank you!!
Featured Answer
Sort by:Oldest
Comments (6)
zaffa
7 years ago- PRO
Nick Smart
7 years ago Related Discussions
This or That: Carpeted or timber stairs?
Comments (78)My parents' old house had a wonderful oak front staircase that my six siblings and I used to race up and down, taking them two or three at a time, with only a casual hold on the railing. I don't know how we managed to never slip or fall. Now, the timber backstairs were steep, and had narrow treads and were poorly lit. We NEVER ran up or down them, but held tightly to the railing and hoped to heck we managed to stay upright. As an adult, my previous home had carpeted stairs, which I slipped on (wearing socks) and fell down twice, though thankfully I was closer to the bottom than the top. My current home has timber stairs with three narrow stainless steel runners stood on edge and inset horizontally across the front of each tread (this is supposed to help reduce risk of slips). I doubt I will get over the anxiety of taking another tumble, so I never go down them wearing socks, and if barefoot, I hold onto the railing for dear life and take it nice and slow. So far so good....See MoreDilemma with the stairs... timber halfway up then carpet?
Comments (9)If there is a storage cupboard underneath the stairs, then I think its best to let go of the open risers. At the end of the day when it comes to stairs, I think you need to make simple decisions, don't complicate it. Sometimes spaces fuss over stairs and they can look great, but they are very impractical, expensive and dangerous. I think if you live in a house with no kids and no elderly, then you can lash out and go for something with more design risk. I think the timber stair profile shown in your picture looks great, and would work well with your vertical timber beam balustrade. However timber stairs can be noisy and quite slippery. If you are using carpet upstairs then you could consider running carpet all the way down the stairs. Don't do the half half thing. In order to finish the edge of the stairs neatly, I would edge the stairs with the plaster finish continuing from the cupboard wall, all the way up to the edge of the stairs and making an edge profile for the carpet to be neatly tucked into. By doing this you could still get the stepping silhouette which would look very cool. Then the beams could run off the plaster surface and not the edge of the carpet. Ultimately carpet may be annoying to have to vacuum, but it is a lot quieter, considerably cheaper and safer than timber stairs. Hope that helps. Good luck with it....See MoreBrand New Townhouse - Carpert on the Stairs - yes or no?
Comments (12)We have timber stairs though downstairs is retail. Being clumsy I've had to put in anti slip aluminium strips on mine . Hubby reckons they look ugly but I do not want to slip all the way down the stairs. have done it on our steps before and stuffed up my ankle. I would carpet it unless you've got lots of room for a big staircase . A narrow one in timber is very dangerous....See MoreStumped by stairs
Comments (65)yes oklouise, I hear all that - absolutely yes it's all about clients understanding/working out properly what they need.........and it's great to be able to seek comments/thoughts on Houzz from a broad range of backgrounds/experiences......the issue though is when it gets into territory where (from my perspective) clearly experience and professional skill will help resolve the problem most effectively (such as on this particular one) that it's therefore appropriate to suggest this the advised way to go.......I suppose I see frequently here capacity for designers to be able to "cut to the chase" most effectively, but of course this needs to be done in a manner underpinned by a thorough understanding and establishment of what the client needs in context, and yes very often the client will require more time to work this all through.........I however still see our role as relevant in that part of the process though, and not necessarily having to "wait" for that to happen, because ultimately as professionals in this position (i believe) have a responsibility (as part of our role as a consultant) to educate people appropriately and thoroughly so they can develop the skills to be able to consolidate their decision-making most appropriately for themselves and the project - by the end of the journey, I find my clients are rather quite the experts!..........this however involves a collaborative approach, egos are shelved and an intimate working relationship, which is very different from the approach (that some designers work to) which is essentially selling a "product" or particular end result, rather than a service....significant difference, and again, horses for courses ;)...See More- PRO
Nick Smart
7 years ago 
PROMiami Stainless
7 years ago
PROGet Andy Building P/L
7 years agolast modified: 7 years ago
Sponsored
Miami Stainless