Hi Karl, Blum do not make kitchens as you say but their designs include drawer carcasses where you can take your pick of a range of drawer fronts, not sure if this extends to doors. Issue for my glass want is their Aus range of fronts doesn't include the glass they offer in Europe. Im aware of the range of aluminium frames available but I'm after frameless, the look of frameless lightly frosted glass with a painted backing is pretty amazing, to my preference. I've chosen to use a glazier who does Splashbacks and glue thin hardened glass fronts onto precut doors. Seems like the attention needs to be laid to making sure the silicone and double sided tape don't react with the paint that would result in read-through, and laying the doors flat for adhesive curing

I will start with an admission - I have read nothing of the comments. However I have helped a friend design a compact laundry. Here was how we did it. 1. Start with a list of everything - and I mean everything, include pegs, those little lint ball things for the washing machine, buckets, mops, vacuum, airers etc - that you want to store in the space. 2. Break that list into where you want to store it - drawers, wall, or cupboard - and then rewrite the list as cupboard, drawers, wall etc.As you are doing this, see if you can store those items elsewhere - we added a ceiling airer in the bathroom using pulleys. Also mark any item that a special storage gadget might help. We added to the back of one door (I think they were custom made 925mm and 2300mm high) a hanger for the vacuum hose, and in the cupboard a hanger that slides out for the brooms and mop. 3. Go measure the space you have, and be exact - if the measurement is 1457mm it is 1457mm. Also, see where you might "borrow" space from. We managed to add another 650mm deep, 750mm wide cupboard by swapping the two bedrooms around, and using space in the guest bedroom wardrobe. 4. Draw up a plan, and be really specific. If you think you need four drawers and a top mounted sink then plan that way. Whilst you are planning think over whether you want top spec and not hide it, or to hide it behind really nice doors. We used reasonable quality from Bunnings and modified because it was behind doors. Also, don't be afraid to "borrow" something from a different zone. In my laundry I used a round kitchen sink, because I didn't want a really deep laundry tub so I could use the room underneath. 5. Go and find a really good quality cupboard manufacturer or builder and ask them to look over your plan and ideas. They may tweak to assist, but remember you know your space and what you will be using it for better than anyone. In my friends case, she had a brother who assisted and made a super looking set of doors. As to resale value, that depends on who you want to buy it, but I have one piece of advice - don't go for the resale value, do it because that is what you want. In my friends case she turned her laundry into the bathroom, and then turned the oversized bathroom into a very natty study. Good Luck.

yes oklouise, I hear all that - absolutely yes it's all about clients understanding/working out properly what they need.........and it's great to be able to seek comments/thoughts on Houzz from a broad range of backgrounds/experiences......the issue though is when it gets into territory where (from my perspective) clearly experience and professional skill will help resolve the problem most effectively (such as on this particular one) that it's therefore appropriate to suggest this the advised way to go.......I suppose I see frequently here capacity for designers to be able to "cut to the chase" most effectively, but of course this needs to be done in a manner underpinned by a thorough understanding and establishment of what the client needs in context, and yes very often the client will require more time to work this all through.........I however still see our role as relevant in that part of the process though, and not necessarily having to "wait" for that to happen, because ultimately as professionals in this position (i believe) have a responsibility (as part of our role as a consultant) to educate people appropriately and thoroughly so they can develop the skills to be able to consolidate their decision-making most appropriately for themselves and the project - by the end of the journey, I find my clients are rather quite the experts!..........this however involves a collaborative approach, egos are shelved and an intimate working relationship, which is very different from the approach (that some designers work to) which is essentially selling a "product" or particular end result, rather than a service....significant difference, and again, horses for courses ;)

If you can, and of course this will depend upon budget, I'd be dropping the verandah so it & internal connects better both physically and visually to the external space - if it were me I'd actually develop a solution to lower the whole level of the verandah/splitting the difference between the house and the pool level - but yes agree with Retro in that you need to consider fencing and compliance and possibly here if space is tight solution may be looking at how to get the deck balustrading to serve the purpose of the pool fence which may be easier said than done........either way think of the whole concept and how the elements relate/connect, not just separate components...good luck :) PD