Kerrie, I live in Victoria and my pool in completely internal, that is to say it is part of the house and not an addition to the house. I planned to have an external door with the required regulation lock height and seld closing mechanism. Hubby was dead against this door and so I agreed to have a window instead, not long after, we found out that the laws had changed and you are no longer permitted to access to an indoor pool from the outside, so it was just sheer luck that we changed the door to a window. Further, when we purchased the awning windows (2) with regulation restricted 10cm windouts, our building inspector tried to tell us that the windows weren't allowed and that they would have to remain shut and we were also going to have to concrete "bars" into the brickwork on the outside. I argued that regulation pool fences had the same 10cm restriction and after contacting the Victorian Building Commission, I have confirmation in writing, that the windows are deemed to be adequately safe and the inspector has accepted the finding. My access to our pool now, is only from the inside of the home obviously and if that becomes illegal, then we'll just have to sit and look at the pool longingly through the window, as there won't be any access at all ha-ha I'm not advocating that people argue with regulations but if I hadn't investigated my options further, who knows where I would be, having spent $1,500 on these two windows with laminated glass and how beautiful would my brickwork have looked with prisson bars attached. Cheers, Barbara

@wuff -- I bought mine a few months ago while on a trip to the USA. It wasn't on holiday and had limited shopping time, which left me with empty luggage space to fill :-). I visited a discount/surplus items store and got them cheap! I'd been looking for months for some, but nothing I saw here came close to the heavy-quality metal of the ones I bought. They're made by a company called Seville Classics. Here's a link to their website page: https://www.sevilleclassics.com/kitchen_counter_top_organizer Following my return to Oz, I emailed the company enquiring about availability in Australia. I never received a reply. Much to my surprise, I recently discovered that Howards Storage World is now selling them. Here's the link: http://www.hsw.com.au/index.php?product&id_prod=6558&id_cat=106&id_dept=510#.VcDbmSkbA5s The one available at HSW is as shown in my earlier photos and is different to the ones I have. I'm not sure if the thickness of the metal is the same. Kind of hard to tell when I didn't have mine with me at HSW. Items are so much easier to access than if they were stacked. Best part is that others in the house have no excuse about putting items back into these organising racks. Here's a link showing the Seville products being sold by HSW. http://www.hsw.com.au/?product=&search=seville&op=search_products&x=0&y=0

Which one is that, Astrid? 1, 2, 3 or 4? Petal & I both liked 2 and 4 but the extent of glass (and the necessary cleaning) in 4 put Petal off, while the mortuary feel of all that stainless steel put me off. 2 doesn't really excite us either but it's the best of a questionable lot. ;-)

Hi Patricia, that sounds like one of those 'rules of thumb' that can't necessarily be relied upon. There are a lot of factors to consider when burying or partially burying a water tank including the hydrostatic pressure (if you have a high water table there is a change the tank could float right out of the hole when empty), soil pressure which could distort your tank etc. I guess the first question I would ask you is 'why a 30,000L tank?'. Are you diverting all of your downpipes? How much roof area to you have? There may be other space saving solutions that don't rely on you partially burying a tank. Happy to help if you want to send me an email or just reply here.