Hi! Lovely to hear from you. We are an online store but based in Melbourne. We have free shipping Australia wide. This is the clear version attached however we do have the ability to source other types if you had something in mind? Look forward to hearing from you. Feel free to email me directly at castelleleon@gmail.com if you would like to proceed with order or have further questions Thanks!!

This explanation may help, Source: https://www.renovatorstore.com.au/blog/lighting-and-power-in-your-bathroom-the-simple-rules-to-be-safe/ REQUIREMENTS Zone 0: Inside the bath or shower. Any Lighting used here must have a minimum rating of IP67 (protected against immersion in water) Zone 1: Above the bath or shower to a height of 2.25m. A minimum rating of IP44 is required Zone 2: The area stretching to 0.6m outside the bath or shower and above the bath or shower if over 2.25m. An IP rating of at least IP44 is required Outside Zone: Anywhere outside zones 0, 1 & 2. Where water jets are not to be used for cleaning purposes, the general rules of BS7671 apply In addition to the above, if there is a likelihood of water jets being used for cleaning purpose in zones 1 and 2 a fitting rated a minimum IP65 must be used. Now that this has been explained, always make sure to purchase bathroom lighting according to these standards to make sure that your bathroom is always safe. You should also have this principle applied when you purchase other electrical devices such as heated towel rails, or a guide to where you'd put sockets in your bath for razors and other devices. This may also fix the common misconception that LED lights are not rated for bathrooms. Typical LED lights have an IP rating of IP66 which is more than the needed IP rating standard that bathrooms should have. - Not to mention you'd be saving a whole lot from energy bills in the long run.

If you are in New Zealand, I have often found great lights (and a big range) at Lighting Plus. When I was putting my house on the market I put three of these: http://www.lightingplus.co.nz/lighting/pendants/contemporary/jaga-bcopal-1light-pendant.html over my kitchen benchtop, and they looked just gorgeous. So gorgeous in fact, that I have already bought three new ones in advance for when I upgrade the kitchen lighting in my new house. They also have these : http://www.lightingplus.co.nz/lighting/pendants/contemporary/hudson25-whitegold-1lt-pendant.html or these: http://www.lightingplus.co.nz/lighting/pendants/contemporary/trumpet35-pendant-blackgold.html  if you like the look of the internal gold under the shade. There are also others similar. I have also found some great lights at : http://www.edenlighting.co.nz/collections/pendant-lights . All of these are very affordable. However if you want to go really high end, and you like NZ timber lights, you can't go past : https://www.davidtrubridge.com/collection/lighting/  Just my 2c. Enjoy.

I think you're right, you'll have to move the light if you want to put in a fan. Why do you think you need the fan? There might be another option.