just viewed your imagined dilemma - the jade colour of doors - are they a laminate - if they aren't - yes if you desperately need a change - have white laminate (like the whole neighbourhood). but if the jade cupboards are definitely laminated I would not replace - for the jade is stunning. Furthermore, you would make a good move to extend the black high-gloss laminate to those floor-level cupboard doors which currently have a wood strip (which the previous owner did (I presume)I would suggest you have a single black strip definitely 2inches high inserted as a line in that area. (this job must be done by an experienced laminator - to perfection (this will eliminate the eye-sore strips of wood.( but it must be applied as a continuous band (from a to b) - not bits - Furthermore, the high-gloss black floor-boards will look good so close - meeting each other. I NOTE YOU WOULD DO WELL WITH A LARGISH SLEEK KITCHEN SINK ( YOU SEE BY DOING THESE SMALL CHANGES YOU ARE GETTING A WHOW KITCHEN. Am I imagining the green which seems to extend to the ceiling line is not cupboards up there if that is so do not take the green up to the cornice - the cupboards are the feature not the walls - the cornice in that room should be taken out - having the plastered wall reaching the ceiling without cornice. Your kitchen cupboards are the feature.(it would be good to paint upper walls and ceiling. Just "off white" I am reluctant to tell you the kitchen window should be wider as the kitchen has a message but the window is like a poor relative. If you carry-out these changes - the kitchen should be free of everything else - no utensils on the stove, nothing on benches or on top of other areas - the colour and impact - that is all that is needed (plus it has become modernised) - despite your belief that white is in - maybe in hospitals. Good Luck

Hi I just thought I would leave a comment about the visibility of joins in reconstituted stone such as Caesarstone tops on islands longer than 3 metres. From a patern point of view; by selecting a style that has a fine grain certainly helps with reducing the visibility of a join. As for the join itself, the technology and tooling used to make such joints has come a long way in the last 10 years; therefore if you use a Kitchen Manufacturer who uses up-to-date stone fabrication methods, then such joins can be next to near invisible. Below is a kitchen we made with an Island that is over 4.3 metres long and has a join through the centre; where the join actually has to be pointed out to be seen. We have seen Kitchen Manufactures use the two height method but you really don't have to do this to achieve a long island. If you would like a long island, then you should not be put off by having to have a join; careful selection of your material, manufacturer and planning can achieve great results. Hope this helps anyone reading this article and the comments above.

Ok, so we don't need engineered stone in our kitchen, as we have it there already, but we just had more of the same stone installed in our new powder room & ensuite to match the kitchen's earthy colour scheme. We do, however, need to choose a natural granite for our alfresco kitchen as engineered stones are not covered by manufactures' warranty in our situation. So, I stick with engineered and natural stones for the long term bench top of choice.

Hi Angela. If your existing kitchen works for you, then replacing your benchtop and splashback will definitely work, as well as save you money. Whilst the Caesarstone's Linen is nice, I would recommend Smartstone Amara - it has a marble look, and is one of the more reasonably priced marble-look engineered stones. I have seen it installed and it looks fantastic. With the money saved, I recommend that you invest in some really beautiful tiles for the splashback (even if they are subway style, get really nice ones), some gorgeous new handles, as well as change the colour of your blinds to match as closely as possible the window architraves. A nice new sink and tap (think carefully about undermounted) will also help. Finally, if you can match your existing fronts exactly, then it may also be a good time to change the dishwasher to a fully integrated model. You could also replace the freestanding canopy, etc., as Design Fusion recommends, but that will cost you a quite bit more (it will require not only the new cabinet, but also redoing part of the bulkhead and cornice work), and you may have an issue with the new fronts matching the existing. All the best!