Bravo to all these amazing creative minds. I hate wasting stuff that still has life in it. By the way, though I have read that some pallets are treated with a fumigant which is toxic. Generally, make sure pallets are stamped with “HT”, which means they haven’t been exposed to chemicals (at least not in the treating process.) Avoid unmarked pallets or those with “MB” for methyl bromide. Well, if anyone wants some really nice, bargain 2nd hand windows we just pulled out of our 12 y-o house to make way for a sliding door, and you live around Melbourne Australia, please check them out here: http://www.ebay.com.au/itm/112070272414?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649

Asking friends, colleagues and relatives is often the best place to start as you get the warts n'all version. As you note, if the spaces are small then design becomes even more important. The cost of producing drawings and time needed resolving design/technical issues tends to be similar on most jobs (up to a point). This does translate to a fees becoming a higher percentage on a smaller budget job. Remember it is all part of the investment you make in your home so you need to be confident that you are getting both the best physical outcome but also financial outcome. Next weekend is Sustainable House Day, a great opportunity to go and look through some great examples of design that are working on many levels, you may find you designer/architect through that.... Good luck finding your 'one'

Jacinta, am very sorry to hear that you've had no luck with your project pursuits......but may I also add your story is unfortunately not too uncommon and it doesn't surprise me...........after doing this for a fair while now may I add a comment or two.....skimming through the post above, a completely underestimated and often overlooked skill required by a design professional, whether categorised as an architect, designer, drafty or whatever is their capacity to manage the client's expectations of what is viable in a certain situation for a certain budget with their experience and knowledge. Yes construction costs have risen, and will continue to do so, and that's nothing new. $350K depending upon what you're doing and where, once upon a time was a healthy budget, but not anymore when you stack up the components. that is not to say that you cannot do anything, but to achieve something you'll need to be working with people who are all over the current construction costs and can help you strategically and logically consolidate your priorities simultaneously within the design/creative process to resolve an appropriate solution. There is always a (creative) solution to a scenario and a way to successfully navigate/negotiate challenges such as council limitations, challenging context, budget or whatever. Honestly, as a designer that's the easy bit, the hard(er) part is managing people in negotiating their particular "wants" and expectations and relative costs. What I understand really gets to people (like you have clearly experienced here ) is the unpleasant surprise and disappointment down the track after investing time and money with a company/designer in believing that you're working towards a feasible outcome when in reality the concept/direction is revealed to be non-viable, stonewalled or beyond budget. To avoid exactly this issue I service the front end of projects very broadly considering hard costed concept scenario options and hence "cutting to the chase" in order to appropriately align project requirements and project budget against the relevant specific contextual backdrop. Very quickly we endeavour get a realistic and accurate handle on whether a particular project direction is going to be viable or not and manage the client's expectations appropriately and fairly with minimal time and investment from their end. Depending upon the client and situation this step of the process initiates recalibration of client expectations (on budget or brief) and identification of what is possible one way or another so moving forward can occur with confidence and efficiency. From experience this has proven to avoid the exact situation you've unfortunately experienced. This should not be a "nightmare", rather it should be an exciting time in the process. At the end of the day it all comes down to money, it is invariably the ultimate controller of the decision-making process and accordingly you need to find and work with people who inherently understand this and can design honestly for you with respect to this factor and your specific needs. I hope this helps in some way and completely understand and sympathise with your situation :)

I have only seen one wooden bench top that has managed, over time, to keep the wet out and avoid that black mouldy creepage where the water splashes behind the taps and around tap inserts. It was built by a carpenter and then the owner applied oil to gain the colour desired before applying several coats of marine epoxy (several = at least 5), sanded back before every new layer. It was burn proof and the colour locked in by epoxy coat with no maintenance required (until a visitor put a burning pot on it and left it there while attending to fire on stove, still... only left a black ring. That said, the owner promptly got out the sander and ground back until black ring was no longer charcoal texture, then reapplied oil and layered epoxy until black ring looked like it belonged (can't do that with any other surface I can think of?). After 15 years there is no sight of the insidious black mould from water penetration so I suppose it is the same recipe as with most thing successful projects in life, research, research, preparation, preparation, preparation and don't falter at the finish line.