Well done, it is great to see pieces of quality furniture being re-purposed and not just thrown away. Not to take away from the work of a professional upholsterer but I recently redid a bedhead with some careful planning and a heavy duty staple gun. Turned out great!

Thanks guys for the recommendation . Here are the sample paints against the floor board . Leaning towards natural white and casper white 1/4 . But since casper white is cool tone . Has any one mix warm floor and cool color wall ? And then grey pebble 1/4 for bedrooms .

Things are ticking along . We have a whole lot of long skinny flush-mounted LED taillights -- they won't be fitted until we take Frankie off the road to re-paint , as the existing lights come off , and these ones will need holes cut , the exterior repainted , then these lights bonded ( glued ) in . The Mercedes seats have had new certified mounts made ( being a safety item , we spent about $150 getting them certified -- keeps it legal , although there are literally thousands of vehicles out there that have had seats changed , and no certs ) and we made little 'boxes' that have walnut tops , and all the controls for the electric seats are in these ( on Merc cars , they are on the doors , but our auto sparky has made new mini wiring looms ) . We dropped the seats to the upholsterer last week , so in the next month or so they will be recovered -- a sort of bone/cream leather for the surrounds , and red leather with diamond stitching up the middles . This is almost what my cab looks like , mine has 1980's Falcon or similar bucket seats in a grey vinyl . I assume that was done so that there is only the 2 seats , and you can get through to the back , whereas in the pic with 3 seats , you can't . My interior is the same colours -- 3 different charcoal/grey tones on the dash , then a black on the doors ( why , I have no idea -- I would have thought charcoal would have been better ? ) . Once the seats are back and fitted , I am tempted to get the door cards redone -- do a padded charcoal vinyl that matches one of the dash colours , but do a 'scallop' from the rear of each door in the lighter leather , then a red maybe 150mm wide scallop in the middle . I feel that will tie in the doors , the dash and the seats better . The booth seating ( table and chairs basically ) in the rear will get done the same cream/bone and red leather , to tie it in a bit more . Which then brings up 1 problem . You may have noticed I have used a downloaded pic , and I was going to post a few 'before' pics of the cab and the rear , so you can see it in its 90's wooden and tacky lino glory , but that turns out to be a problem . All the 'before' pics I have are ones that the last owner e-mailed to me . I downloaded them all , they are still on my computer , I can look at them no problem . BUT for some reason , they aren't JPG's -- they show as 'Google Chrome Files' , and I can't work out if I can post them here -- I've tried but nothing happens . Are there any experts that know how to post these 'files' ( pictures ) ?

we have similar wooden doors with plain mesh security screens and confidently leave the glass doors open with screen door locked but instead of frosted glass we have modest venetian blinds attached to the wooden door for sunscreening and privacy...the only drawback is that the good quality wood and safety glass doors and security screens are very expensive but they look great and the glass doors are no more likely to be broken by thieves than all our windows and the greatest invitation to thieves is forgetting to use the locks on any door