Hi I just thought I would leave a comment about the visibility of joins in reconstituted stone such as Caesarstone tops on islands longer than 3 metres. From a patern point of view; by selecting a style that has a fine grain certainly helps with reducing the visibility of a join. As for the join itself, the technology and tooling used to make such joints has come a long way in the last 10 years; therefore if you use a Kitchen Manufacturer who uses up-to-date stone fabrication methods, then such joins can be next to near invisible. Below is a kitchen we made with an Island that is over 4.3 metres long and has a join through the centre; where the join actually has to be pointed out to be seen. We have seen Kitchen Manufactures use the two height method but you really don't have to do this to achieve a long island. If you would like a long island, then you should not be put off by having to have a join; careful selection of your material, manufacturer and planning can achieve great results. Hope this helps anyone reading this article and the comments above.

I wouldn't have timber around a sink or other wet area but I do have a large spotted gum island bench that I just love. In a previous kitchen I had a very deep timber island bench with the stove top into it and, again, that wasn't a problem – because all the things you have to do to maintain the timber bench are just the same things you need to do to have a clean kitchen work area. Maintenance is wiping it over every day (and often several times a day depending on activities) but isn't that what you'd do regardless of the material? Once a week (or even a fortnight if it's been a quiet time) I polish it which means tidying away everything that has collected on it – but, again, regardless of material the tidying away part has to happen regularly and then you may as well give whatever surface it is a good rub. So I don't really understand the chorus of 'But timber takes too much care and maintenance'. The issue of a natural material showing its age and use (patina) is another furphy in my opinion – timber looks better and better as it ages whereas many other materials just look shabbier. The timber glows in daylight and under lights, is quiet, warm and welcoming making it a natural place for people to gather and chat, have a cuppa (or something stronger) and something to nibble on, read the newspaper, make a phone call, do a crossword, whatever ... And it becomes more beautiful as it ages.

True, after 13 years our timber floor has collected its share of stilleto-heel dints, dropped-items dents, dragged furniture grooves and lots more (despite really trying hard with pads under all chairs and tables). One day we will simply have it sanded back and re-laquered. I would never change for tiles or any other flooring, though. You can't beat timber for comfort, temperature, appearance and above all; not showing every speck of dust. We did the same with timber benchtops in our previous house.

Hi Karly, We're loving what you have chosen so far! Although, we all have different tastes and styles - we are leaning towards Linen on this one. http://www.caesarstone.com.au/colour/2230-linen With those stunning rich Kempa floors, a warm neutral colour like Linen would work best. Contrasting white cabinetry - looks like you're onto a winner! Best, Caesarstone Australia