I've noticed a recent trend of the vertical color on the island matching the vertical color on the splashback. Liking that trend. So I would say go with the turquoise glass splash back color. Deepen it a little so the hue is closer to that of the floor. Cant tell from pic whether island cupboards are the same color as cupboards above the splashback. If they are, all the better. That then brings the turquoise/white combo forward into the room and gives some unity.

Hi Rach163 So the splashback is along the wall behind the stove? And is full height to the ceiling? No overhead cabinets there? Certainly for an all-white kitchen, and a very small wood-element on the table, I'd suggest a feature colour splashback. There's a few ways you could make it pop - a colour such as a rich red, or a striking (but not bright) green, or even a blue would work well. We used colour-backed glass for our splashback in our all-white (but dark benchtop) kitchen, which is low maintenance and looks very "rich". It's a red (burgundy?) feature "wall" below overhead cabinets on two sides of our mostly L-shaped kitchen, and we also put it under the island bench/table, to tie the two together. The other idea that struck me is that you have a view to the outside (albeit a covered courtyard dining area now?). That made me think of a mirror to reflect the view, or at least the light - so something like a polished stainless steel. Perhaps in sections or strips with brushed steel, to reduce maintenance :-) For the lighting, we used an led strip under our overhead cabinets, either side of the range-hood, and around the corner to where our sink is. You could do something similar with a narrow aluminium channel either at the ceiling (probably too high) or at range-hood level with an led strip (a waterproof one!) inside it. It's nearly invisible when not on, just a crisp brushed/polished metal line, but gives a really bright uniform light across the whole bench area, and no shading issues with the main room lights behind you. If you wanted real wow, get a multi-colour led strip that can be colour changed (and be dimmed) to suit your needs and moods. And if you wanted to freak people out, you can get a multi-colour programmable led strip that can also do things like active lightwaves, pulsing and respond to music and a bunch of other things :-) All of the strips are dirt cheap, unless you buy them through most Australian lighting stores :-/ We also put a dimmer led strip underneath our island benchtop, to pick up the splashback/underbench colour, and as a nice 'night-light' of an evening. Works really nicely. I've seen some people do it at the kickboard level (i.e. 140mm above the floor), to make it look like everything is floating, but I've found that only works for some kitchens. One of the benefits of controllable coloured led lighting can be that the splashback can also be white or silver, and it's the lighting that determines the perceived colour. Leds are quite directional though, great for benches but less for wider room lighting, unless you have them in a diffuser. We use led lightbulbs in four high ceiling fixtures, and one long-drop over-dining-bench light, since they are lovely and bright and warm (if chosen that way), and as the ambient light source. You can also get colour/controllable led lightbulbs but $$$. You want to think about where you want feature lighting (up or down), work lighting and ambient lighting. Think about where you will stand to work, and which lights you will be shading, which will be shining in your face, and which will actually help. We pushed around our lighting points on the design, and even over-catered on the number of fixtures, just in case we missed something. You can always disconnect a light and cover it trivially, but putting one in later or shifting one is a bit messy. Anyway, my two bits. :-) Cheers, Markus

Like everyone above here ^ LED downlights would be optimal for creating more task focused and general lighting in the space. Due to the nature of your pendant shadowing occurs when the light is on during the evening, this can make it hard to use certain bench space as task areas. If you are unable to do downlights (which can be the case for many customers) wall lights on your task areas would be the next best thing! Try using single spot lights above the areas you use as service spaces, spots that are adjustable would be great as it will allow you to adjust the lighting, be sure that whatever style you select that you pick something that doesn't glare at eye level as this will make it uncomfortable to work with. If you need more help feel free to reach out :) Good luck with your search be sure to post a photo of the final product!

the easiest way to light any space is look at which way the globes point, and you can see it in the picture you posted. When that fitting is turned on the light hits the ceiling first and washes down from there. What you need is functional lighting whether you make a statement of the light or let the kitchen do the talking is up to you, the best form of task lighting for you in there would be a 3 circuit track system, allowing you to place and point the light where you want it. And being 3 circuit the same track could have 3 different functional light fittings suspended from the 1 power source.