Hi Andy, If you have a local Beacon Lighting, ask for advice. It's free and I have found the people most helpful in my area. Being a newbie and building for the first time, I sort of knew what I wanted but the advice I got helped me make the right decision. As for pendant lights, I have just one as a feature over the dining table, a trio and the rest of the house will still have downlights and of course fans in each room, so if you haven't already thought of fans, this will change exactly where you put your lights. I only have 2.4mtr ceilings. Good luck. Cheers, Barbara

I have one these lights in brown but different shape - i could've had the blue ones as it was a choice between the blue and brown. I live in New Zealand, but I think they were sourced from overseas. Check out this link - you can ask the owner, she is a great lady. https://www.facebook.com/Mr-Ralph-534507496617824/timeline/ or http://www.mrralph.co.nz/

Amazingly beautiful!!! There is another Australian designer called Lighting Republic that does something very very similar, but with a brass lamp holder. http://www.lightingrepublic.com.au/en/collections-en/organic Or see here, its in our Sydney showroom. First photo in the middle http://lightco.com.au/index.php?option=com_content&view=article&id=37 And product details http://lightco.com.au/component/virtuemart/organic-large-pendant-detail

This explanation may help, Source: https://www.renovatorstore.com.au/blog/lighting-and-power-in-your-bathroom-the-simple-rules-to-be-safe/ REQUIREMENTS Zone 0: Inside the bath or shower. Any Lighting used here must have a minimum rating of IP67 (protected against immersion in water) Zone 1: Above the bath or shower to a height of 2.25m. A minimum rating of IP44 is required Zone 2: The area stretching to 0.6m outside the bath or shower and above the bath or shower if over 2.25m. An IP rating of at least IP44 is required Outside Zone: Anywhere outside zones 0, 1 & 2. Where water jets are not to be used for cleaning purposes, the general rules of BS7671 apply In addition to the above, if there is a likelihood of water jets being used for cleaning purpose in zones 1 and 2 a fitting rated a minimum IP65 must be used. Now that this has been explained, always make sure to purchase bathroom lighting according to these standards to make sure that your bathroom is always safe. You should also have this principle applied when you purchase other electrical devices such as heated towel rails, or a guide to where you'd put sockets in your bath for razors and other devices. This may also fix the common misconception that LED lights are not rated for bathrooms. Typical LED lights have an IP rating of IP66 which is more than the needed IP rating standard that bathrooms should have. - Not to mention you'd be saving a whole lot from energy bills in the long run.