Thanks for you opinion, Judy! I will ask colour selection consultant whether I can get the same colour of WIP door as joinery doors once I hear from the builder. It has been hard to reach them lately lol

Anything pre fabricated / flat pack will be the most cost effective. Going for a cheaper material like ply will save you some cost, but a lot of the cost is actually in the labour itself. Maybe combine some flat pack items with some custom made items so the fit out fits your space exactly and gives you that built in look. Good luck.

There are a number of challenges here that arise frequently, namely: The space is tight, and budget seems an issue. Door options: 1 sliding cavity door into robe- problem: people rarely bother to close them so often a pointless result 2 Hinged doors on the cabinetry-problem the galley you have is only 2000mm wide or even 2200mm. This will make it very tight if you plan to have hinged doors with both sides at 600mm carcass depth leaving either 800mm or 1000mm aisle. This will mean you don't have clearance for you and a door swing, assuming a door width of 500-600mm . You will find it very claustrophobic, and impossible with two people using it. 3 Sliding doors-these will limit your access to the interior and most people dislike them, however probably a workable solution- if you go this way, put the door track at 660mm not 600mm to clear suit jackets. 4 Enclose only one side of the wardrobe with doors and have the other for hanging which tend to be neater than the shelf items.(choose the side that is most visible from the front door. Depending on your ratio requirement of hanging to shelving/drawers, you might fit all hanging on one side then you can have drawers all along the lower section with shelving above with upper doors only. That way, the swing of the doors is easier as you don't need to clear your feet, only your upper body. Then gain bonus space in the area by making the enclosed cabinets only 400mm deep externally. Folded clothing folds to 360-380mm so don't waste the space with 600mm depth. Any additional hanging required on the enclosed wall is positioned distant to the entry and will be mainly out of view. This will save on doors, space and look tidy. It requires a custom build, the cost of this walk in robe in gloss melamine was around $7500.00 including design. Best of luck. The walk in below is 2000mm across, the first section on the left is 400mm deep for his shoes and drawers, the section on the right is 620mm deep. The distant section on the left is 600m providing space for hanging. That way the aisle in the first part is more generous and this tight space feels generouson the left we have his shoes behind doors and drawers below-at 400mm deep this makes the aisle more generous to cope with doors the photo below shows with door near the entry to conceal the"mess"from the walk way(see the appearance from the doorway in top photo), the hanging at the end is not visible at the entry we made the most of the full depth for shoes in our custom drawers

To my untrained eye, it strikes me as a really nice design generally - so great job. I’m keen to vote, but feel like we need to see the upstairs layout for Option 2 to understand the trade-offs (what will the space previously dedicated to the laundry be repurposed for) - sorry if you’ve posted / explained this and I can’t see it working off the phone.