What a great big room. The ideas are endless. Not sure if you live in Melb but I would get professional help. Honestly it doesn't cost a lot and you have peace of mind. For the painting go to any paint store, even Bunnings. They have the ph nos for a paint colour consultant. (I went with Dulux) but most Paint companies now have colour consultants to come out for a fee. The consultant comes out for a fee approx.($150) but that was for a few rooms. Then if you buy their paint, the price of the consultation is deducted off the paint you purchase. So really the consultation is free, if you choose their paint. Freedom decorator consultant works the same way. Can't remember how much (no more than $200) and she gave me great ideas. If you buy anything from them, again it's deducted off your purchase. There is no commitment with either paint company of Freedom to purchase from them. The advantage is, you can have the amount spent deducted from purchase. Honestly it cost saving and you get professional advise. Win Win situation. We've built 3 times and painted the house myself, and I have been so glad I did the above, with both paint and furnishings.. Plus I do up my own furniture, (most bought at garage sales) so I only purchased what I really wanted from Freedom, the rest 99%, I got from op shops and did up myself. But the ideas are helpful. Honestly, you need to know what decore you want in your room? So they will work around that. If your unsure, they will look at the rest of the house and work with your ideas. I like French provin. So I worked around that, Just to give you ideas you don't have to spend a fortune. My bedroom is also huge. Haven't took photos all-round. I redid all the furniture in both rooms. The above cabinet was brown stain which I painted white. GOODLUCK

Well after a very (very very very) long time my Living Room is all but complete. There is some work to do behind the new steps and some trim to be put on the bookshelves. A light is to be put between the couches (that the electrical cable hanging down) and the wall lights are going to be removed. So just a quick rundown on what has been achieved; Two sky windows - Velux - roofing guy Sheeted under the beams - plasterer New carpet – Bunnings – carpet layer Closed off the old bar and put in a door – builder and plasterer Installed ceiling fans – Hunter, remote control, reversible – electrician Installed downlights - electrician Painted the endwalls – Solver Paint but Dulux Chine White colour - me Painted the ceiling – 2 x coats Solver Ceiling White over 2 x coats plaster board sealer - me New blinds (venetians) and curtains - from Spotlight - me Installed a gas bayonet heater (until I can afford a gas ‘wood’ fire for the fireplace – cripes they are expensive) – secondhand from Garage Sale - me Installed bookshelves – 2 x 202mm high + 2 x 106mm high Billy Bookshelf and 2 x Brimnes Cabinet - me Built and installed new steps and bench top on bookshelf – laminated Beech bench top, cut to size and routed, stained and oiled - me Sofas – Ikea Ektorp - me So some things I would have done differently. The downlights would be warm white not welding mask white. In fact I would re-think the whole light thing and possibly use lights with reflectors that were dark so that light was only reflected down. They would ‘lower’ the ceiling and make the room cosier I think. I kinda like the ceiling fans but had seen some which were awesome but really expensive. Then I saw ones very similar to the awesome ones but much cheaper but by then it was too late. I should have put bi-fold doors where the old bar was instead of a swinging door. I suspect that it will be unlikely now that I can use the room for its intended purpose. In fact with hindsight I coulda shoulda done the job myself rather than getting a builder in. It’s not as good as it should be and that has disappointed me. The bookshelves have come a up a treat – need to finish them off though with some trim. All from ‘Ikea’ except for the timber bench top. The bench top was a light bulb moment and breaks up the all-white appearance of the shelves. Also the white of the shelves and the white of the cabinet were slightly different and the bench has helped disguise that. The bench top and the steps were laminated beech panels from ‘Bunnings’ that I had cut to size. I stained them, put a router over the edge to round it off and then coated with Tung Oil. The bookshelves look bigger in real life than they do in the photos too. So now to sit and enjoy my handy work.

depends on your over all desired look. Traditional is to do same as the woodwork, and a good idea if the wardrobes are not particularly worthy of featuring. T

Your kitchen looks like it may be original with the house and has had a number of makeovers since it was built. It looks like a builders kitchen, and probably not the highest quality with hinges and runners starting to wear out at a guess. You can't apply a two-pack finish to old doors that have been painted (and repainted) before and expect a perfect finish. I wouldn't buy new doors and drawer fronts in such an old kitchen, but look at upgrading all of the knobs to handles and repainting to work with the materials and colours that you won't be changing, such as the benchtop and flooring. Many kitchens have a life span as things wear out and technology changes. All of the little jobs and upgrades that you have described will be fiddly and expensive due to the labour content. Don't waste too much of your money on upgrades to this old kitchen but save up for a new one. A well designed, new kitchen will make better use of the space, and be designed to give you the storage you need, and house the appliances that you want to make cooking a pleasure. Best of luck, Dr Retro of Dr Retro House Calls