I would have your bench top supplier cut a thin batten of timber in the same 40mm thickness, and fix this as a front to a white melamine shelf. For a couple of reasons. Melamine is easiest to keep clean, whereas a varnish or oiled timber will require constant maintenance and resealing if it is used often, it will discolour and even with the sealant it does not like moisture, being natural, all timbers expand and contract in temp changes. Melamine is stable, and won't be seen from the viewpoint, and the timber front will make it look more substantial. Secondly, this thickness will be necessary to avoid shelf deflection, where lengths over 900mm will commonly sag under weight. Reinforcing your shelf with timber battens will avoid this, and the timber edge strip again hides it. If all this seems a little too hard, just invest in solid timber shelves of around 40mm, but have the tops laminated.

Hello Stella In the flooring industry this type of flooring was called a floating floor, because it sits on an underlay. Now it is called an engineered floor (and stops the first question being about the noise underfoot).... but the noise remains depending on the level of the floor and the type of underlay. Engineered floors have a number of layers of timber/ply at right angles to allow the expansion/contraction of the grain to be controlled. The top layer is the prefinished or raw timber species that you want with the other layers in various ply. There are cheaper alternatives again that have particle board (chipboard) or mdf backing with a laminate printed pattern. These are, in my humble opinion not worth opening the box. A solid timber floor can be laid a multitude of ways. Over concrete, I waterproof the slab, level it and glue and nail a plywood sheet. The timber is then laid over it, sanded and flooded (gaps filled) then sealed with a finish being either oil or water/oil based polyurethane. It can also be stained before sealing. With the engineered floors, they come from all over the world. Some are made in China, some are made in Indonesia, some are made in Europe and so on. A major supplier to a lot of the flooring companies is a company called Premium Floors. They supply products to eg carpet shops inc Quick-step and have done for many many years. Their website is worth a look before you go out into retail outlets. As to your original question, when I built my first family home I installed a readyflor (premium floors as it happened) floating floor. The floor withstood some almighty parties (before kids) and still looks amazing 18 years later (it hasn't been sanded at all). Today, I only install solid timber floors in our work purely because of personal preference and the type of renovations we are doing, and when requested by a client we have sourced from Europe. Cheers

My sister got the dark coloured boards. You could see every footprint and scratch and it did her head in! She ended up having them all re-sanded and stained a lighter colour. They did look gorgeous in the dark colour when they were laid, but once the day to day traffic of living started happening...not so much. Good luck with choosing!

When my own home was rebuilt in Christchurch I used wood vinyl flooring in Rimu colour. It works fantastically in any wet areas like bathrooms and kitchen and laundry (washing machine overflows! No problem). It looks so real and wears extremely well. The colours you can get are amazing and it clicks together. I currently also work in the flooring section of a home improvement store and having looked at how the different engineered floors are made and wood laminates and bamboos, I would say that if you dont have the money to spend at the highest level of engineered timber dont go for the cheapest. The wood grain is printed on and any moisture will kill that floor. Bamboo is a great option as it solid banboo. The engineered has a 3mm or so layer of the actual timber. It can be re-sanded lightly if it scratches. Personally I would go with the wood vinyl planking again. Looks fantastic.