I will start with an admission - I have read nothing of the comments. However I have helped a friend design a compact laundry. Here was how we did it. 1. Start with a list of everything - and I mean everything, include pegs, those little lint ball things for the washing machine, buckets, mops, vacuum, airers etc - that you want to store in the space. 2. Break that list into where you want to store it - drawers, wall, or cupboard - and then rewrite the list as cupboard, drawers, wall etc.As you are doing this, see if you can store those items elsewhere - we added a ceiling airer in the bathroom using pulleys. Also mark any item that a special storage gadget might help. We added to the back of one door (I think they were custom made 925mm and 2300mm high) a hanger for the vacuum hose, and in the cupboard a hanger that slides out for the brooms and mop. 3. Go measure the space you have, and be exact - if the measurement is 1457mm it is 1457mm. Also, see where you might "borrow" space from. We managed to add another 650mm deep, 750mm wide cupboard by swapping the two bedrooms around, and using space in the guest bedroom wardrobe. 4. Draw up a plan, and be really specific. If you think you need four drawers and a top mounted sink then plan that way. Whilst you are planning think over whether you want top spec and not hide it, or to hide it behind really nice doors. We used reasonable quality from Bunnings and modified because it was behind doors. Also, don't be afraid to "borrow" something from a different zone. In my laundry I used a round kitchen sink, because I didn't want a really deep laundry tub so I could use the room underneath. 5. Go and find a really good quality cupboard manufacturer or builder and ask them to look over your plan and ideas. They may tweak to assist, but remember you know your space and what you will be using it for better than anyone. In my friends case, she had a brother who assisted and made a super looking set of doors. As to resale value, that depends on who you want to buy it, but I have one piece of advice - don't go for the resale value, do it because that is what you want. In my friends case she turned her laundry into the bathroom, and then turned the oversized bathroom into a very natty study. Good Luck.

I have a Meile heat pump condenser dryer, it is really efficient to run and I have no moisture in the air and only a very small amount of heat. I chose one with a drainage tube so I never need to empty the liquid out. This is great. I wish they had self cleaning filters though. There are 3 to clean. 2 after each use and 1 about once a month. I use my dryer every day.

It gets too humid where I live and so the dryer probably gets used more than I would prefer. Every new laundry should have a space for a clothes dryer so what you have done looks spot on. At ground level you can easily transfer from the washing machine to the dryer. In smaller laundries with less wall then stack them as you still need space for a sink. I don't think stacking looks as smart if its a property for sale, however space efficiency is key, so it really depends on what how you want the space to function. Having bench space is also important for sorting and general working.

Hi Souzette, Front loaders look great but can be a pain, We still like to soak things in the sink and getting anything like a sheet into the machine if it's not next to the sink becomes messy, so seeing that we try to avoid using the dryer we have the washer next to the sink Our preferred way to dry things most of the year is on the clothes line or on the retractable line we have above the bench and in front of the window But then we all do things differently, and you live in a colder area. Did you finish the original bathroom FYI The following link shows how to change the door on an Electrolux machine, not sure if it works on any others https://www.cnet.com/pictures/switch-your-washing-machine-door-to-the-other-side/11/