Hi Naomi, generally white gloss 300x600 (rectified) wall tiles are around $25-$30/m2 Floor tiles can vary a lot. 300x300's & 300x600's are very popular but I would recommend a floor tile of at least $40/m2 There is a misconception that lighter means it will feel bigger. Whereas, simpler will feel bigger. For the floor tiles, keep to natural tones (timber, slate type colours). The only colours I wouldn't go is white (or close to white, need contrast from walls) - and I wouldn't use a colour that replicates your vanity cupboards. A slate floor against a white wall can really provide a "non-offensive POP!" Good luck ! Doug. Perth W.A.

Hi creativelychallenged, I'm pretty sure all the tiles are faux-marble from Beaumont Tiles. I've used them in bathrooms and they are cost-effective (from $40sqm un-laid) and look beautiful. Marble and now faux-marble is a classic look so not prone to dating. You may have noticed its recent popularity due to the faux-marble now available as the average homeowner may not have the budget for real marble. People worry about decor 'dating' - think about what you love, what will make you happy to live with - decor doesn't last forever because our own tastes change and decor can suffer from wear and tear. Choose what you LOVE and you can't go wrong :-)

because the water could seep through the joints between the new tiles and sit between the two layers and affect the seal and also raise the height of the floor and affect the slope to the waste outlets..but, why do you want to retile if you're not using the bathroom??...for immediate resale consider bathroom wall to wall bathroom carpet, new wall paint, new vanity, taps and light fittings which should also be cheaper than tiling over the top and, if it's not allowed by the body corporate, it will be a risk to future sales as it should not satisfy a proper building inspection

Yes the second way. Lay out a line of tiles in each direction at key points and look for best fit remembering tiles need to start flush with outside edge of door. The tiles at the entry will need to be cut around the door