We have tiles that do not have a gloss finish. They are Encaustic, or at least I think that is what the style is called.

Your kitchen is small and already quite busy. I would make it as simple and clean as possible. You can't beat ceramic tiles for cost, durability and ease of installation. Have a look at Johnson's Spectrum range to see if you can match the green. https://www.johnsontiles.com.au/product/spectrum/?utm_campaign=1602072422&utm_source=google&utm_medium=cpc&utm_content=304640004469&utm_term=&adgroupid=61761480198&gclid=CjwKCAjw_YPnBRBREiwAIP6TJ0idAicM8vfEevC-WrwRVNmbtUPHfDAjvNpkaOIo0hzN0dwMw9u1rxoC0VkQAvD_BwE You will get a neater finish with ceramic tiles than you will with trying to work with DIY stainless steel, particularly around the edges. There are lots of online resources to show how easy it is to lay smaller ceramic tiles. Leave the large format porcelain tiles to the professionals. Best of luck, Dr Retro of Dr Retro House Calls

Hmm asbestos is insidious. It is not just about wearing ppe as the dust travels and settles elsewhere. That is why it costs so much to remove, they have to seal the area and then vacuum all dust and filter air (hepa filter)before reopening. One has to be careful not to disturb the asbestos, when in any doubt call in professionals, you only get one set of lungs.

Hi Mc10. I bought the Calcatta subway tiles on a mesh and will use this Lithofin MN Stain-Stop Tile Sealer once every 3 years. I’m still in the middle of the kitchen reno but got my marbles and they’re exquisite. https://marbleceramiccorp.com.au/lithofin-sealant-germany/1026-lithofin-mn-stain-stop.html?gclid=Cj0KCQjwr-SSBhC9ARIsANhzu16AK7RpYQb4yMtmHougfhBuuiyMAu930aAIj-0gu55tx1mM4dc-IOkaAr-ZEALw_wcB