Hi there! Yeah it will look great! If you are going for Laminex or Formica, ask your designer/joiner about ABS tape edging, they can do bench tops now without the black line on the edge but it's only available in specific colours.

I have only seen one wooden bench top that has managed, over time, to keep the wet out and avoid that black mouldy creepage where the water splashes behind the taps and around tap inserts. It was built by a carpenter and then the owner applied oil to gain the colour desired before applying several coats of marine epoxy (several = at least 5), sanded back before every new layer. It was burn proof and the colour locked in by epoxy coat with no maintenance required (until a visitor put a burning pot on it and left it there while attending to fire on stove, still... only left a black ring. That said, the owner promptly got out the sander and ground back until black ring was no longer charcoal texture, then reapplied oil and layered epoxy until black ring looked like it belonged (can't do that with any other surface I can think of?). After 15 years there is no sight of the insidious black mould from water penetration so I suppose it is the same recipe as with most thing successful projects in life, research, research, preparation, preparation, preparation and don't falter at the finish line.

Getting a quote on the Grande Statuario. I think it’s going to be significantly dearer than our first quote ☹️ The crispness of the White is perfect with great veining. Second quote being done with main island in the Statuario and with Smartstone along benches under window and into pantry, in case the first is too dear. Took our Lexicon 1/4 and overhead samples with us. Really happy with the choices. I just hope the first quote isn’t too dear as I’d prefer all white but I’d be happy with the combination of both tops.

Don't go with white. While it is easy to replace door fronts and drawer fronts you won't be able to replace the tall vertical panels adjacent to the fridge recess and the microwave recess without pulling out half of your cabinetwork. If you went with a white you wouldn't be able to match the same white as these vertical panels, and the new white would look off next to the old white or vice versa! I'm afraid there is no easy solution that will make the new doors blend in with the old vertical panels, so I would go with a bold contrast colour block that looks good with the white vertical panels, as well as the black granite. Perhaps consider a Piet Mondrian inspired kitchen facelift, by introducing some black edging to the vertical cabinets and a careful composition of blocks of primary colours? Best of luck, Dr Retro of Dr Retro House Calls/Dr Retro Virtual Visits