I am just wondering whether it is a good thing or not to go with solid colours like the dark blue (prussian blue), grey floors and white on other walls all in tiles. I see that a lot of designers seem to do a pattern on one wall, but I haven't found one suitable and whatever I do, I just don't want it to look out of date in 5 years time. I am not sure how about much of the prussian blue tile is appropriate in order for it to be noticeable but not too overpowering.

depending on the size of the existing vanity it should be possible to have a similar new vanity or a custom unit made to replace the original but a chat with a plumber should be arranged to recommend suitable options and plan a schedule to remove the old and install the new, including any necessary waterproofing or tile repairs..btw careful removal could allow the original sink, taps and even the counter to be saved and recycled into a new vanity that matches the bathroom perfectly with the added option of being able to add different doors or drawers to the cabinet

Yes thank you for your thoughts. the room is 2.8 (with window) vs 3.4m. I do find it a bit annoying too as I don't like that you open the door and see straight away into the shower (though I'm certain the door would have a lock). I'm sure they lined the bath up to be with the window as visually that looks better, but then I find the space at the end annoying. I like the alternative drawings (I like three of them lots!) and I had been considering an drop in bath built wall to wall rather than a freestanding but also finding it frustrating to find a really nice supportive bath and there are less drop in baths than freestanding around at the moment which is a bit annoying. Thanks Anna for the picture, that helps as that looks good (though we would have more space at either end, 50cm) and I prefer the look of yours with some space but not as cavenous... I think I might have to have a talk with my husband as we really need to work out what to do!!

how old is the house as you may need to check for asbestos on walls and floor and is teh whole house a slab on ground if not the floor under the tiles may not be concrete..., when replacing floor tiles i would also replace skirts to ensure waterproofing is above the floor all around (and avoid a potential leak at the join) and depending on what you are planning to do (ëg install new shower stall or wet floor?) i would also consult your tiler about "levelling the floor" which is much more complicated than we think.. and take your time removing the old tiles, especially on the walls as it's better to do as little damage (to the structure and yourself) as possible and you will find many online DIY instructions for retiling that are worth reading before you start...good luck with your project