Agree wiuth Barbara and anyone thinking iof putting a paint-loaded brush or roller anywhere near a vintage timber piece of furniture..."it would be a... SIN! Seems the compulsion of the mass renovcators is to paint everything....and its the easiest solution. Don't think happy renovators and DIY-ers have changed much over the years either. I have just finished stripping five coats of enamel from the most beautiful set of silky oak french doors with etched frosted glass...how many SINS there!!! Silky oak is an open grain timber so the last coats had to be done by the funny little man out in his bush shack restoration shed...and Oh what a beautiful job! I am over the moon and do not care what it cost...although it was not a lot compared to what I'd have paid in Sydney. Here a tip for any appreciators...(.if there are any left) of fine timbers. All you need is an old enamel bath tub and gallons of metholated spirits....just give it a bath and save yourself hours of scraping and fumes and burns. SORRY about the deviatiuon but this is my latest Soap Box...don't paint vintage timber! About your problem Wendi, I think, with Barbara, wait until you have your whole dining set and then stain the piece to fit in with the timber in that...( unless you are going to get a white one...( tongue in cheek). I've seen some really nice dining sets with the best of both ...legs and table frame in a (cringe) painted colour and table top in timber...saw a really desirable inlaid table top at my favourite little man's shed last week..the rest was painted and had a drawer for each place....with old metal handles. Legs were on castors.. The chair seats were upholstered...but needed recovering and the frames were metal...could have been an alloy of sorts. The combination of unpainted- stained timber..especially in inlay, with the painted parts, the metal frames and upholstered chairs just fitted together perfectly...so best of both. You migh be lucky enough to find the perfect table with a natural timber top...( and I wish you to find one with an inlaid design featurting timbers of different hues....) then your lovely little cabinet/sideboard might fit perfectly! There are some lovely timber stains around today...timber can be stained any colour...as long as its a transparent dye. A wonderful product is FEZLAC...that's the base and it is a shellac. To this you add the stain -colour you want. I've used it to put designs (fake inlay) on the backs of some really lovely old chairs...imitating the different natural timber hues in real inlay....So above are a few words, tales and suggestions that I hope will inspire you NOT to paint that cabinet.

Hello, Staining timber floors after floor sanding can be a tricky job. As someone has suggested, it is best to do some tests on the boards that you have. The floor sanding company that you choose should be able to do some stain samples for you if you give them the boards to experiment on. Feast Watson is a good product, but you will probably find that best stain colour for your timber floor is a blend of a couple of colours. Perhaps a blend of walnut and another colour . It really comes down to personal taste. Some contrast to other timber furniture is a good idea. Take a look at our Budget Floor Sanding Brisbane blog page for some more floor sanding information. Type "staining"into the search box, the second floor sanding blog has a couple of photos of a new timber pine floor( light colored similar to Baltic pine ) that we stained with Feast Watson prooftint, to blend in with a older floor. Hope this helps. All the best with your timber floor restoration. http://budgetfloorsanding.com.au/

Who makes the sausage in bread, the homeowner, or will the pro bring it?

Hi I need help with colour choices. I am trying to decide between these two stain/stair colours. The dark brown (Elm) is the natural light one. My stair treads will be carpeted with this carpet colour and the downstairs floor will be this bleached spotted gum. Which looks best with this? The contrasting dark or the more matching light?