We have four farmhouse style sinks in two different houses, and all present the same problem. It doesn't have anything to do with the material as two sinks are concrete, one stainless steel, and one composite stone. With the two kitchen sinks it's very frustrating spraying out the food particles from corner to corner. Food particles go from one side to the other, and it's very difficult to corral them to the drain. The two concrete bathroom sinks don't have enough slope, so when shaving and brushing teeth, the water and material flow to the opposite side of the sink. It's annoying to wash a 3' wide sink every time it's used. And gross if the sink isn't cleaned from side to side after every use. As a compromise, we're installing a farmhouse concrete bathroom sink with two drains and more slope. As I evaluate many things in life, a, farmhouse sink is a solutions looking for problem.

I agree with the first comment. Check out the Maximum porcelain panels. Ice attached a photo I took of the slabs. Statuario is in the front and Calacutta is behind it. http://maximumaustralia.com/products/calacatta This is the Australian link to the product range and there are plenty of photos of it actually in use. In person the design looks less printed in my opinion than the Caesarstone, but everyone has different tastes and that should be respected.

Under sink bin added when we moved to our home 18 years ago as there was not a lot of floor room. Opening door was awkward. However now with an updated kitchen it was suggested to have pull out bin in island bench. Chop food on bench then scraps into bins. Too easy. It is practical, more room to move around work zones with re configuration. If you empty regularly it is not a problem with odour and part of the integrated design. Its clever cabinetry.

Unfortunately Erina, your best bet sometimes in this industry is to cut your losses and if it important enough to rectify, outsource a separate contractor/company to come in and re-do it at your own expense.....you just have to look at it as part of the cost of your project.......many people will have stories of deciding pay twice (sometimes more!) to eventually achieve the satisfactory results - ultimately you have to live with it long term and sometimes it's worth it to get it right....ultimately only you can make that decision one way or the other........it's not necessarily right or fair, but unfortunately these are the risks (& hard lessons) of building Best of luck Erina, PD :)