Hi fb57, Great charming federation house, retain the front and fix the back, then maybe later you can put in a granny flat - depending on cost and local council bylaws. I would not put in an attic - stairs are a good place for mishaps and as we age it might have limited functionality - but if its something you have your heart set on it might prove worth while. It appears that you are competent enough to do a decent measure up plan, going from what you have posted - you might need to take a few photo and a few other dimension to get a good design from someone working online. The idea is to get a design that you are happy with and then get a local competent Drafts-person to do your working drawings for a Building Permit and then get it built with a Builder of your choice. This would result in my opinion in a significant saving and a design of your choice, especially if you are willing to do some of the legwork with council and other authorities. To get a good design that you feel is a solution to your requirements, you need to produce a variety of design schemes (plans elevations perspectives etc.) and this can be done online with any competent Building Designer that you can get along with. It will not take one go at it - and it will not be quick, as you need time to digest every scheme but generally it works out in the long run. These are some of the things I would look at: 1. The possibility of breaking up the build into stages - maybe stage one do the renovations at the back and the stage 2 place in a granny flat. 2. As you have good access on both sides of the property I would place a new garage on the largest width and possible gate and walkway on the other side to give individual access to the granny flat. The new garage would be as closely to the front as possible, with the new fence an gate on the other side it would greatly improve security. 3. Depending on budget I would provide a bathroom shower and toilet with a walk in robe to the main bedroom and redo the kitchen and laundry if required. 4.The area next to the lounge area I would develop into an external entertainment area. 5 Since you mentioned that you have a "Fibro Extension" it implies to me that you may have asbestos on the property - get an expert in and determine if you need to remove asbestos when you renovate - this is a dangerous material and you should take all precautions possible to avoid long term damage. 6. An indication of the position of your neighbors windows and setback might also help in providing a design that complies with your planning laws and respects your adjoining neighbors. Like all things it will take a few revisions to get it right , but if you are willing to work at it, it will payoff in the end. The first thing is to draw up the existing conditions to scale so that an initial proposal showing possibilities can be worked on. I would be willing to work on this project with you online, I hope this is of some help. Regards Michael Manias mm407p@gmail.com

re the floor, what about garage matting tiles, as in photo attached, but lay them in a groovier pattern, perhaps a chevron or 60's pattern, if leaning towards MCM. It may not be any dearer than the cost after getting a tiler in, if laying tiles? Also, you can take them out to clean them if need to and change the look whenever you feel the need!

Thanks Kiwimills - Good suggestion but we are using the space in the garage to line with shelving and a freestanding freezer. Thanks again Oklouise - I will have to check on the actual type of dryer I have. Maybe I have the terminology wrong. Maybe I meant heat pump or...it’s been a while since I researched and bought it but it’s stacked over the washer. Doubt that’d be working if it was a condenser. That was a great tip about the toilet - can’t believe I hadn’t thought about that before!! We’re signing off on these plans on Monday so I’d better check if there’s time for a last minute change. Will affect slab and velux so will see but glad you mentioned it! And thank you Kate for your comment too. We had a regular door initially but at 1000mm width, the room wouldn’t allow room to lay down an ironing board easily with a door swung open. Removing the door swing will assist with that somewhat. And I’m used to entering my laundry door currently via a 720mm slider so it won’t bother me. Thanks again everyone! So helpful!

Hi Lila The waste pipe can still work with the L shape but if you are concerned, switch the sink and BBQ locations. That way the BBQ fumes will be further from the house too. Access to the back yard is always a consideration but I wouldn't let it rule your overall design as there are always ways around it. I had a mini bobcat come through my house to dig the pool in the back yard when I lived in Brisbane!!! A sail maker or equestrian sewer could easily make a good cover for the bench unit and I've seen it work on several occasions, but I would save up for the pergola to the side of the house which without any issues with the neighbour, could go to within 1.1m of the boundary or just as I drew it. Good luck with the decision making and enjoy your alfresco lifestyle.