Yes painting is not a task I enjoy & think the concrete is probably best left as is - with the exception of a good wash.... that being said .... I can almost visualise the building now with black/charcoal windows & doors & lots of mass plantings creeping up to the concrete & now feel the dark growth on the concrete might just serve to pull the space together with the help of a structure overhead. Hahaha listen to me... I've gone from hating my concrete to almost defending it :) Siriuskey could you try posting the link again please as it just goes to Google home page? Or even a search topic & I'll try to find it. Thank you all for your suggestions & hopefully I'll have an updated image to share sooner rather than later.

I work in tiles and the normal splashback height is 600 mm. This is because overhead cupboards are usually this height above the bench top. In your case you don't have this so can do anything you like. If you tile to low 200mm etc the wall gets damaged - paint doesn't wear like tiles. There are many materials you can use as a splash back but most aren't durable eg Perspex. Glass and tiles have the edge. Textured splashes are in hence the hand made tiles. If grout annoys you use large tiles you can get them up to 1200mm long these days with rectified edges you only have 1.5mm gap. Use sealer on the grout, they are now easy clean. If you have the money tile to the bulkhead a much more luxurious look. Maybe in a charcoal. I don't know how these gaps are getting so dirty. I use spray and wipe with a toothbrush occasionally and it takes little time and always clean.

Hi everyone, thank you all so much for your comments- each one has been really helpful & thank you to those who have complimented the work. I still fluctuate with whether I love it or not, but as jdublya says, i think its just a mid reno freak out! My original colour choice was a dark brown, but unfortunately following other suggestions, it ended up being black. Anywho I will continue to push through with all the other plans- light grey walls, white door frames and doors, and black handles. Then have a think about wall art - frames etc. Once all of that is done i will post an update and let you know if we decide to change anything with the stairs. Also thought I'd mention that the colour of the flooring on the first level has come out a lot more red than it actually appears in real life. I am quite excited to finish the project but of course with limited funds, 3 kids, 2 dogs and a kitten it takes a lot of time! Sit tight, will update as and when :) Thanks again all, your encouragement is encouraging ;-)

Gorgeous brick pavers, I love that look for the floor! It has a rustic appearance yet you're right- sophisticated, even an elegance. I think this would suit the feeling I'm wanting for the room, the pine boards have a rustic appearance, this would go well with them. We have a 1m square oak table with cross back chairs for the dining section and a La Spezia 3 light pendant (Beacon), farmhouse sink, timber hood cover to give you an idea of the look we're going for. Thanks very much for your thoughts on this. I like the idea you're going with, but yes, we have the window and door in already. Door could be trimmed if necessary. It wasn't until the window was already made and the wall sheets and cladding was removed that we realised the original kitchen layout had the back door next to the window, and the door into the laundry section was a modification. I most likely would have put it back where it was originally or had double doors. It made no logical sense for the back door to be a thoroughfare through the laundry, eliminating valuable storage space. I may have just left the kitchen in the original layout and made an entry into the laundry from the kitchen side for a laundry/butler's pantry with fridge in there. Removed the side window for more wall space for storage and changed the existing door to a window. But it's too late now, the outside of the house has all been newly clad so doors and windows are as is. There's no other possible place in the house for a laundry. It is a very tight space. Plan to build an external laundry studio in the future. The one in the house would be temporary, yet need it to accommodate a washer dryer combo for now, and be suitable for prospective buyers/renters in future if the external laundry doesn't eventuate. This is the original 1960's floor plan. A previous owner made internal access into the laundry and made bench space where the original back door was, the next owners opened up the living to dining room and blocked up the hallway doorway which became the fridge space. The cornice didn't match up in the hallway though where the old doorway was. They had made a shelf from the cut out on the hallway side, and the protruding section in the kitchen side became a kind of bulkhead for the fridge. Old hallway We've rebuilt this so that it could have an upper cabinet on the kitchen side/ hallway later if needed. But the lack of space in the hallway didn't allow us to build a linen cupboard, so that will also be needed to be included somewhere in the house. At this stage, thinking we will have to configure the laundry space to have a linen cupboard/ broom cupboard between the dining room and laundry section. Open to ideas too for storage in that limited laundry area space. I'll add more measurements to the floor plan for reference.