the only one that won't really go with yellow is the beige one and even that one, dependent on the "yellow" could possibly blend in. If it were me, I would go with the grey, but that is just me. The charcoal may be the most versatile, but i don't really like it.

@ sally wastie....Would have loved those pine kitchen cupboards....before they were painted. Had I a strong yen for :a bit of colour"...(and I do love colour), I would have had a new glossy multi coloured counter top, probably something very striking and then oiled the pine cupboard doors There were no work benches in the kitchen of my 1920s all pine cottage ( always say that the kitchen was an afterthought since it is positioned just of a hallway and consisted only of a sink and a wood burning stove.) I built a small bench/table using VJ pine slats I'd removed from elsewhere and then put a thick pine top that curved out from the small straight bench to form a little round kitchen table..Then came the fun, I painted the benchtop and table a datk teale colour, gave it a flecked faux marble finish and a couple of coats of high gloss waterproof varnish. Nothing terribly amazing but it did give the old...'kitchen space' a bit of a lift. Had a larger round kitchen table with a formica top and timber legs...so gave the table-top the same teale treatment as the bench and it now lives on the veranda that came a few years later. Yes! Teale of any shade always looks good with timber. The only pity was that the kitchen walls and ceiling here were terribly smoke stained and had been painted a really horrible pre WWII green. Begrudgingly, I repainted the walls but used a bright orange/yellow to complement the dark teale colour ( this particular yellow is a good colour to keep the flies out) and, in keeping with the era of the house, I installed a built in dark timber kitchen hutch found at the dump shop. The kitchen is the only room to have been painted and repainted....but still have the dark timber parquetry floors. If you get tired of all timber a few splashes of bright colour in well-thought-out places do not go astray. If you have vertical timber panelled walls and you are feeling hemmed in... a good trick is to stain a small section of panels a darker wood colour or with a coloured stain to shift the focus from all the timber. or you can bleach the timber panels lighter. This idea can create interest extending ceilngward from behind a furniture piece...say low display cabinet...or just in a section of wall. You enhance the all timber 'look' with an eye -catching timber panel of another timber hue...like having a mahogany panel set in a light timber wall... Just a few ideas for those feeling a bit claustrphobic in an all timber house....understandable, not all of us aspire to live in a log cabin...but if carefully accented, an all timber interior can be extremely impressive and will not date. This is a pre-digital shot of the glass panels I had installed in the wall around my bed head...its really faded PIC but you can get the idea. Looks better today since the glass has been decoratively frosted with patterns. The sunroom behind the bedroomThis is also a pre-digital PIC showing the little timber kitchen bench with the teale table top. The end and other side of the bench is stained timber. This little table seats 3 or 4. Pity you can't see the old parquetry floor here. Old formica table given a lift with a Teale coloured painted top...there's no room for it in the ' kitchen space'. Amazing what a little lick of the right colour can do in an all timber house.

I personally think the cladding would look nice and be the easiest to maintain. We also live on the Gold Coast and have a brick house that has been rendered (not by us) and, to be honest, it is not particularly low maintenance (if you want it to stay looking good that is). It is prone to leaching which leaves ugly stains so regularly needs retouching with the paintbrush. It can also develop small cracks in the render due to temperature change and movement. However, the most worrying thing for us is with regards to termites. If you render over your brick on the lower half of your house, it is highly unlikely you will see the telltale "mud" they leave that indicates they are trying to gain access into your house (they climb up in between the render and the brickwork). I would be trying to keep the exposed bricks in preference to rendering over them, particularly if you have a garden bed up against the house anywhere.

Hi Katrine, The renovation went really well - thanks! It's been finished for more than a year now - hard to believe!! I could only find one pic of the cladding that was easy for me to upload - here it is. We've been really happy with the FC cladding and how it looks. We replaced all the existing exterior weatherboards (which ran on an angle parallel to the roof) with the same Duragroove FC cladding that we covered the new extension in. Our builders said it is very easy to work with and it certainly went up very quickly. Their only comment was that you can end up with a fair bit of wastage as it often gets damaged in transit. The supplier they used said this is pretty common, however, and so they actually allow for it and oversupply somewhat to allow a proportion of damaged sheets - sorry I can't quantify this aspect for you. The cladding was very easy and quick to paint and we're very happy with how it has come up. If you're interested in details, it's painted in a new Colourbond colour called Gully. The darker trim (fascias, gutters, downpipes etc) is Woodland Grey. Good luck with your decision making. If you'd like more photos, let me know and I'll try to take and upload a few more. Cheers, Kate