I am not that far from Ingleburn. I will go and have a look but I am interested to hear their reputation since I had never heard of them and I am worried that the doors may later warp if they haven't been dried properly. In the mean time I have found and Australian manufacturer at Mittagong I'm going check out. I don't really have the option of only buying one door since my builder has suddenly become available due to another job not being ready. Ive already waited 6 months for him ( I know he's a good builder so i was happy to wait).

I would seek out a local architect/building designer/good draftsman. There's a lot going on with what you're aiming for. You will need someone with in-depth knowledge of that area. There's a lot of calculations and investigating to be made before anything. Apart from what you've mentioned, sewerage and storm water and a detailed site survey with the soil testing are needed. I'd also guess there are height restrictions to boot....... Keep us posted though as this will be a very interesting project.

As previously mentioned, not traditional baths can be a nightmare with kids, so if kids are on your agenda, have a good think. Also, if you are not going to stay in the house for a LONG time, consider resale. Parents look for traditional baths for young children and non-traditional bathrooms look good, but can be a real turnoff. If this is your forever, no-kid home, go for it. If not, perhaps reconsider. I am also wondering why you are looking to spend so much on a bathroom that you will not be using (apart from the bath)? Just be careful you haven't overspent/overcapitalised on a portion of the house that really only needs to be functional and modern. People might love the bathrooms on the block, or whatever, but they buy houses in their price-range with functional amenities. Just some food for thought. Good luck with the build.

Hi Kezzle This is a bit intricate but it should make sense... The flooring industry has tried to move across from lineal metres (lm) to square metres. Normally carpet is 3.66m wide (12ft). It sounds horrendous to buy a 4m wide (15ft) carpet at $390 lm, but if you express it as $97 sqm it's not so bad. Nevertheless, the flooring industry buys it from the suppliers in lineal metres and calculates the quantities in lm also. The trick is to balance the number of joins vs the wastage when deciding the layout. There is also a little trick in the trade where they crimp the quantity but that is for another day... There are two ways of laying the carpet upstairs. The first way is front to back of the house ie 'down' the room in eg bed 1 as shown below. This way will mean you will have a join in bedroom 3 and two in the passage, 1 being in the line of the wir doorway and the other in the line of the bed 3 cupboard. Here is a rough mud map... I can't quite make out the measurements very well, so I have written down the assumed numbers in lineal (length) metres. You can change these if incorrect. In the games room, you will have 1 join which you can't avoid due to the size of the room. This will require around 22.9 lineal metres of carpet.... and at $97.5sqm it should be costing you about $8930. Alternatively if you were paying $9,600 then the real cost of the carpet is $105 sqm.... just like Dr Retro (and there is the trick) If you turn it around the other way, you will have more joins and could do it for around 21.5-22.5lm depending on how many pieces are used in joins... I would go into the shop and ask them to show you how they are installing it.... then crunch the numbers yourself... There are about 3 or 4 ways this can be done so the above is just one... Cheers