Hi I just thought I would leave a comment about the visibility of joins in reconstituted stone such as Caesarstone tops on islands longer than 3 metres. From a patern point of view; by selecting a style that has a fine grain certainly helps with reducing the visibility of a join. As for the join itself, the technology and tooling used to make such joints has come a long way in the last 10 years; therefore if you use a Kitchen Manufacturer who uses up-to-date stone fabrication methods, then such joins can be next to near invisible. Below is a kitchen we made with an Island that is over 4.3 metres long and has a join through the centre; where the join actually has to be pointed out to be seen. We have seen Kitchen Manufactures use the two height method but you really don't have to do this to achieve a long island. If you would like a long island, then you should not be put off by having to have a join; careful selection of your material, manufacturer and planning can achieve great results. Hope this helps anyone reading this article and the comments above.

Hi Lil, I believe your original plan works much better than the revised version. While the notion of ideal working widths is great, the larger problem here is the post. I worked on a project very similar to this last year where a post could either be connect to, or separate from the island. What we found was that by separating the island the space between island and post became very awkward. It's not enough of a space to comfortably walk through or be seated at the island in front of. Instead of your room feeling open and generous in proportion, it is going to start to feel cramped and awkward. We have a kitchen in our showroom (Kitchen Studio Tauranga NZ) with a 6ft gap between bench and back wall and it works wonderfully. It allows someone to work at the sink and a second at the island with ease. Stick with the original plan. It will feel a lot more spacious, without compromising work flows.

How wide are the shell pendants that you have posted? The peninsula is only 2500mm so if you have more than one over that bench top, it may look crowded. I would not do pendants where you want your DINING table in an open plan space. This then restricts/dictates your positioning of ALL furniture. I would do smaller pendants as per Julie Herbert suggestions. The shells will date quickly. And they will always need dusting.

Servery window. stacker. Larger bed 2. Door from hallway to outside for breeze and extra light in hallway plus easier acces to bathroom when entertaining outside. More room in front of masters for a luxury feel. (current hallway looks a bit cramped.) x H L