Hi, we received an email from Houzz about you and I thought I would introduce our business; Sydney Doors to you as we could be of service. We manufacture custom made kitchen and wardrobe doors in a raw or polyurethane finish. We also pick up and deliver and are known for our friendly, efficient service. Please contact me if we can be of assistance. Regards.

If those prices don't include the electrician's costs of connection then to me they don't match up and I'd say your supplier/installer can't do maths lol. Pricing will change between supplier and of course electricians, and of course I'm working off the impression that the floors are flat where you want it installed. If the quote includes the electrical work, as in it covers everything besides tiling to where you can switch it on, then it looks reasonable to me and sits around the ballpark of what we paid. With the electrician's connection costs included then the figures match up better between the bathrooms and the living area, looking at it from a total per m2 viewpoint. If it includes the floor covering as well, then I'd say get on the phone and book the job straight away before they realise their mistake lmao. For instance if the quote is just for material and install, without electrical connection then the two bathrooms are quoted at $166.66 per m2 and the living area is quoted at $53.57 per m2. A large difference at cost per m2. If however the quotes include the electrical connection then you can average out the m2 cost across all three rooms and it amounts to $73.53 per m2. The electrician would be charging the same price for connection of each room (with only minor differences) if there is nothing out of the ordinary in any room. That means it's a static cost in each room that could make the bathroom quotes look inflated, and the living room look on the cheaper side. When you have a m2 quote on something across multiple rooms of different sizes, it's important to factor in anything outside of materials that's included in the quote. Assuming the install could be considered standard (whether it be underfloor heating, tiling, carpet, etc.) there will be other costs involved such as labour hours, wiring connection, installation materials, etc. Some can be considered static such as the electrician installing a single thermostat in each room, whatever actual size that room may be. Others will be more fluid such as labour hours for the tradesmen doing the install - will take a lot longer to lay tiles in a room of 56m2 than it will to lay them in a room 6m2. Whenever you are given a quote involving installations by m2, it's important to get them to detail what exactly is included in the quote. If you don't do this you run the chance of ripping yourself off. Let's say you get 3 different quotes from underfloor heating suppliers who all give you different prices but without details. One may look more expensive than the other two but actually be cheaper overall due to including everything up to 'turn on' phase, where the other two may only include supplying and laying the underfloor heating with you having to organise your own electrician after install.

Even though I love the look of a container and they have a lot going for them, the dollar's just didn't add up for them to be a cost effective solution when compared to standard building practice's. They are just a bit to narrow which is where the main issue stemmed from. Joining two together work's but again paying a metal shop to do it bumped up the cost's with structural steelwork, engineering detailing/shop drawing's, etc. I used to be a boilermaker welder many year's ago so know what was needed....... Shame they didn't work out cost wise as I can see the attraction. Nevertheless, I would investigate both option's of using a container as the starting point, then compare it to if you used standard building processes of timber frame and cladding with the same dimension's......

Hydronic slab heating is fairly straightforward to install and not that expensive compared with other forms of central heating. If you try to cool the slab, it becomes a lot more complicated. First up, cooling the slab does nothing to remove humidity from the air, which is a large part of what makes you feel hot. Second, you need some way of controlling the heat pump between heating and cooling mode. Usually we use mechanical thermostats which switch on when the house gets below the set temperature, but when you change to cooling mode it needs turn on when the indoor temperature is above the set temperature, so instead of a standard central heating thermostat you instead need an electronic temperature sensor. Anything is possible, but the short answer is that having a chilled slab will be more complicated and more expensive than an air conditioner, and less effective. You'll also need to find a contractor to design the system, and because it will be a custom design if you have any issues in the future you'll need to get the same person who installed it to come and fix it, which is a problem if they move, go on holiday, or close their business.