You can get any colour paint you like in any strength - 1/4, 1/2, 3/4 or full - its only a colour, so they will mix it to your request. Have you made yourselves a colour board? if not, you will need to get all your selection colours together and then go to bunnings or a paint shop and get some sample pots of the colours you are debating. (yes it will cost to get sample pots, but seriously you need to do it - and get the varying strengths in the same colour as well). If you are worried about the render colour marking, go the 1/2 strength on the render and 1/4 on the mouldings. Your Wow factor will come with your varying textures - brickwork/render and trims/timber doors, and the wrought iron. I'm guessing you have exterior lighting? some beautiful exterior lights will be the icing on the cake.

what an unusual looking house..would love to see the internal floor plans...my suggestions would be to keep the colours simple with Lexicon quarter for all painted walls (including the bricks?) black fascias and barge boards, dark grey gutters, black front door, white windows and try painting the striped blind and roof over the upstairs balcony in a deep grey, consider having wide steps across the front instead of sideways and lose the central garden bed and the untidy tall palm and consider new landscaping

The characteristics of the Queenslander house makes it the most iconic domestic building type constructed as well as being one of the signature's of Australian architecture. The sub-tropical residential architecture of Brisbane is acknowledged as the most original and distinctive of all the Australia cities. Owning an old Queenslander is a challenging task to meet our modern living requirements. Old houses have to be dealt with a sensitive & intelligent skill to adapt to today’s living. Our client owns a 1920’s Queenslander on a hill at Brisbane’s bayside. The land size is a standard double lot at 810sq.m, facing West. The original house was one level house with two bedrooms, one bathroom, T-shape living room and kitchen. The lower section of the house was semi enclosed for laundry and storage. Around 1930 the previous owner enlarged the house foot print by enclosing the south side verandah and building a new full length north side verandah. This alteration had created an odd room in the middle of the house which also acted as the passage to the north side new verandah. The house was tired, rundown and overall foot print of the house is not sufficient for the couple for living and home office. Our client decided to reconfigure the interior layout, and to open up the back of the house. How did we restore the original house facade? (*Note that it was important for the client to restore & correctly detail the front facade as the house is in a character streetscape recognised by the council) *Restoration of the front facade involved the removal of all casement windows and awnings for complete stripping and painting & reinstating. *Ugly plastic drainpipes and guttering were replaced with new charcoal colorbond gutters and pipes. Attention to detail involved the relocation of down pipes to be set back from the front facade to ensure the clean look of the entrance. *Verandah bat wing doors were installed at the top of the stair to emphasise the entrance and provide security. *Removal of 1970’s external window screens to unveil all windows to their original beauty of the house *Replacement of the rusted TL-5 square rib old profile roof with the new S-Rib corrugated roof *Repaint the entire house in a clean cut monotone colour scheme. FRONT FACADE: BEFORE AFTER: BACK FACADE: BEFORE DURING CONSTRUCTION framework of the addition section AFTER SIDE FACADE BEFORE DURING CONSTRUCTION The framework of the addition section at the far end of this photo AFTER How did we plan the addition at the back yard seamless joining the original section -Why we created the seamless new open plan extension? The existing old house had no connection or view to the large back garden. The sea breezes were blocked with fixed glazing & one single door led to a low roofed deck. -Why we did not raise the house to double storey on the original foot print? The site is on a double sloping low hill which would have required extensive excavation, retaining walls & drainage. Compromised excavated outside zones leading from the side elevations would have created poorly naturally lit rooms along with inefficient air flow. This house does not require air conditioning. The double storey would have required repeat height new internal and back deck staircases. -Why we did not clear and bulldoze the back yard for new landscaping? After a 50 year old feature tree fell over, the back yard was planted with native indigenous SE Queensland trees 10 years ago. This has now formed a back drop of native greenery which is now being enhanced with further planting to create the best coastal eco-system. A double front colorbond shed was recycled & is now repositioned in a happy neighbours backyard. We will share the interior part in next post. Keep watching. www.8designlab.com.au

Absolutely..love these Images thank you. The white main colour and dark accents along with the terracotta will look amazing. The garden will be a lot of fun yet I am cautious not to overdo and carried away. Do you think the shutters and the large window frames can handle the dark colours or do away with the storm shutters?