Anyone have a Roomba? Would love advice/to hear your experiences
Becky Harris
9 years ago
Featured Answer
Sort by:Oldest
Comments (14)
tandypurser1
9 years agoRelated Discussions
Experience with Solar Heaters?
Comments (113)@solarventi, Hi, sorry, I didnt work it correctly, It is an interesting concept, but I am not getting it>>> bit slow... How do you heat up in winter in Vic when we get very little sun and the weather has turned Artic this year, Main reason I am noticing the cold, especially when working outside. I do have low blood pressure so feel the cold, but the red clothing next to skin works a charm. I would like to understand... I have seen on uTube where they DIY passive heat I liked the pictures but no explanation and these were using exisiting windows .. I this with gap at bottom on outside so cold air comes in and gap at top on inside so warm air into house.... but got to technical for me. And I get confused, as hot air rises and I dont understand why fans are at the top in newer models not at bottom [of heaters] But I would mind understanding how it works.. Am going to check the website, TU very much. I have bats to put in kitchen reno but would like something to attach to the corrogated iron so there is no gap between iron and bats. Appreciate your help and will check again on your site to see if I missed anything :)...See MoreWould you dare paint your floorboards?
Comments (53)Firstly...are you sure they are jarrah and not som other more exotic timber? If you are fortunate enough to have a genuine 1932 built cottage I say "Don't Do it!" Just look at the beautiful timber in that floor! It would be sinful to paint it. I have a 1924 cottage with beautiful hoop pine floorboards all from the day it was built. My suggestion is to have the boards sanded and polished. I would not even dare go near them with polyurethane. I have turned back the clock and used the methods of the period of the house...a mix of pale boiled linseed oil and kero. Put it on with a mop or a deck mop or a wool mop leave it soak in. Re-do and leave it soak in,,,( you won't get patches...the floors will just soak it up.) Third coat, add a bit of turps to the mix as a white ant deterrent. Then, when the floors look like they've soaked up enough, get a big old fashioned string mop...if you can find one...or use a deck scrubber and old towels...or even a wad of new ones...100% cotton...its worth it, and rub off as much of the surplus as possible...wear sox so you will notice when the sox do not get oil stained anymore. First go is a long process but you will be really pleased when the floors have had several "drinks". After that you could get just an ordinary floor varnish or oil or just a sealant. Some of the modern wood treatments are really good. Then, every so often do the boards over with your "Oil Mop". You will never find timber like that again and, in my experience, it adds to the value of the house big time. Do what you like to any gyprock and plastered walls but PLEASE love your floorboards and any natural timber...especially from that era. I've been in this old cottage for 32 years. Everyone wants to know where I sourced the "new" floorboards", and who did I get to make my silky oak windows! Hope that helps....See MoreExtension plans, feedback/advice sought. Last chance to make changes.
Comments (27)I'm not here to argue, but an approved plan can be resubmitted as a variation for approval. The blind acceptance of an approval limits your creativity, and the clients ability to obtain the best possible solution. This problem requires thinking outside the box which is what we have offered. The client must decide if the process and cost of approval of a variation is worthwhile. They shouldn't live there wondering if only we had done this or done that due to a blind acceptance that once approved there can be no variations. Realistically everything that has been suggested should result in the need to seek an approval especially when changes to plumbing are considered. Erase what you are not happy with and redesign that space without the shackles of poor space planning. You don't have to like my suggestion but don't limit yourself either....See MoreWe're new to renovating and would love your advice
Comments (94)Just to confirm I have taken the great ideas presented here as advice only and have no intention to do some dodgy diy reno's. With the exception of a couple of quirky exposed timbers as you can see in my pictures there are no other exposed beams. As you can also see from the pictures there is a large roof space on the right (east) side of the house but the ceilings themselves are flat with a slight dip on the north wall. Based on my own personal experiences I would have to agree with Two's Company that there is a tendency towards rendered brick in WA (although there are still many exposed brick houses in my suburb) while double enclosed double garages are also highly desirable. I would also agree that toilets within the main bathroom and non traditional laundries may be considered unusual by many (but not all). Ensuites with toilets however are still very common. Also due to the nature of our work we would prefer the laundry separated from food/kitchen area. For a 4x2 house it is only around 155m2 excluding carport/alfresco which makes the rooms feel quite cramped, hence the desire to open up the family room. However, as Two's Company suggests we will need to first get a builder/eng in to check load bearing walls etc as this will undoubtedly affect what we can achieve within our budget. Having said that I still excited by many of your ideas and with luck hopefully can work some of them into the budget. Cheers all :)...See MoreBecky Harris
9 years agoalh1
7 years agosummery
7 years agoBecky Harris
7 years ago
annabel398