The Dover Height Lower Flight is of closed rise, cut stringer construction.
Stringers and risers are constructed in Pine and painted to match the doors and skirting boards. Treads are of 280 x 42mm Laminated Victorian Ash a durable and cost effective sustainable hardwood. The timber tread and painted stringer/riser appearance gives away a floating effect which when looking at the stair from the bottom of the stair there becomes a visual break between tile and tread.
The Balustrade is constructed of 90x40mm Victorian Ash. The timber screen balustrade begins fixed to the top of the treads and will follow through past the staircase above and finish as the level balustrade on level 3. A Wall rail has been added for a continuous hand hold as per NNC regulations and designed to match the screen.

The Dover Height Upper Flight is an open rise, mono-stringer construction.
This staircase is completely constructed in Victorian Ash with 280 x 42 mm Laminated Treads. The stringer is laminated sections 320 x 175 mm in size. The Balustrade is constructed of 90x40mm Victorian Ash. The timber screen balustrade began from the staircase below and is fitted to the joist and treads as it continues and finish at the level balustrade on level 3. A Wall rail has been added for a continuous hand hold as per NNC regulations and designed to match the screen.
The full timber appearance compliments the marble tiles with its light neutral tones and well defined lines, the staircase is situated directly in the centre of the home. Its natural timber warms the home and is visible from all living and entertainment areas.
Staircase Designer - Brian D'Herueux
Photos - Justin Seputra