Filling gaps between timber floor boards can lead to disaster and is best avoided. Sanded and polished timber floors tend to swell slightly during the humid months of the year and shrink again in the drier months. This creates movement in the timber floor. If you fill the floor when the gaps are at their widest and then encounter some humid weather, the floors will swell, closing the gap and forcing the filling out of the grooves and cracking the timber floor finish. This looks far worse than gaps in the polished timber floors. If you can't live with the gaps, laying a engineered timber floor over the top may be your best choice. Painting your floors white is also best to avoid as this only accentuates the size of the gaps. Good luck with your decision. Engineered timber floors

Hi Andrew, I think you are asking what type of timber you can use to match your floors. You may like to consider either Karri, ( or Spotted Gum, Nyatoh or Tasmanian Blackwood) as these are readily available hardwood timbers in this varigated tone and grain pattern you have. It is also worth noting that Timbers that start out with red in them also actually fade over time to turn this nutty colour. Once you decide on a spiecies, your Cabinet Maker may also be able to hand pick colours to get the closest match. Hope this helps; regards Malcolm.

Hi Badobbs Structafloor will only span 600mm unsupported in the 22mm and 450mm in the 19mm version so no, it alone won't fix your issue. A simple fix would be to pull up the floor in the affected area and then 'pack' it up to level, THEN lay some structaflor over the new supported sub floor. This is done by getting a laser level and marking out the low points in the joists then making up packers to suit, or installing a packer and planing it down to suit. It depends on the level of dipping. It will be your cheapest option and definitely a job for your carpenter (unless you're handy). Regarding disturbing the floorboards that is nonsense. If there are other issues such as other sagging floorboards then you can address them at the same time, or fix them down properly with screws. I suspect that the real issue is that the wall removal did not take into account that the floor joists are usually fixed to it and they are now unsupported. If you get under there and find issues with your joists/bearers then it is not a big deal to install a couple of stumps/connect bearers to support them whilst it is open. We do it all the time. Either way laying a new floor over a subfloor without addressing it would be a waste of money and will degrade your new floor. Cheers

Canberra Timber Flooring Installation, Australia, Timber Flooring Wholesale Supplier - Flooring 2 You Flooring 2 You is one of the most trusted timber flooring installation service providers in Canberra, Australia. At Flooring 2 You you can get healthy, safe, formaldehyde-free eco-timber flooring at factory prices. We provide timber flooring installation services as well as timber flooring materials wholesale. Welcome to contact us to learn more! Flooring 2 You https://flooring2you.com.au/