@ sally wastie....Would have loved those pine kitchen cupboards....before they were painted. Had I a strong yen for :a bit of colour"...(and I do love colour), I would have had a new glossy multi coloured counter top, probably something very striking and then oiled the pine cupboard doors There were no work benches in the kitchen of my 1920s all pine cottage ( always say that the kitchen was an afterthought since it is positioned just of a hallway and consisted only of a sink and a wood burning stove.) I built a small bench/table using VJ pine slats I'd removed from elsewhere and then put a thick pine top that curved out from the small straight bench to form a little round kitchen table..Then came the fun, I painted the benchtop and table a datk teale colour, gave it a flecked faux marble finish and a couple of coats of high gloss waterproof varnish. Nothing terribly amazing but it did give the old...'kitchen space' a bit of a lift. Had a larger round kitchen table with a formica top and timber legs...so gave the table-top the same teale treatment as the bench and it now lives on the veranda that came a few years later. Yes! Teale of any shade always looks good with timber. The only pity was that the kitchen walls and ceiling here were terribly smoke stained and had been painted a really horrible pre WWII green. Begrudgingly, I repainted the walls but used a bright orange/yellow to complement the dark teale colour ( this particular yellow is a good colour to keep the flies out) and, in keeping with the era of the house, I installed a built in dark timber kitchen hutch found at the dump shop. The kitchen is the only room to have been painted and repainted....but still have the dark timber parquetry floors. If you get tired of all timber a few splashes of bright colour in well-thought-out places do not go astray. If you have vertical timber panelled walls and you are feeling hemmed in... a good trick is to stain a small section of panels a darker wood colour or with a coloured stain to shift the focus from all the timber. or you can bleach the timber panels lighter. This idea can create interest extending ceilngward from behind a furniture piece...say low display cabinet...or just in a section of wall. You enhance the all timber 'look' with an eye -catching timber panel of another timber hue...like having a mahogany panel set in a light timber wall... Just a few ideas for those feeling a bit claustrphobic in an all timber house....understandable, not all of us aspire to live in a log cabin...but if carefully accented, an all timber interior can be extremely impressive and will not date. This is a pre-digital shot of the glass panels I had installed in the wall around my bed head...its really faded PIC but you can get the idea. Looks better today since the glass has been decoratively frosted with patterns. The sunroom behind the bedroomThis is also a pre-digital PIC showing the little timber kitchen bench with the teale table top. The end and other side of the bench is stained timber. This little table seats 3 or 4. Pity you can't see the old parquetry floor here. Old formica table given a lift with a Teale coloured painted top...there's no room for it in the ' kitchen space'. Amazing what a little lick of the right colour can do in an all timber house.

No that is not correct. It will be Synteco oil that he will be talking about I assume. I have only used it once because we could not get enough of the livos oil in wa for one job. That was in a yoga school about 10 years ago. Still going strong. I am selling my house in about a year and after 6 years of renovations, three dogs and kids that are now 12 and 13, I will only consider polishing our floor with a white pad. Show me a poly floor that can hold up to that. Actually our floor looks better now than it did when it was first done. Sanders don't like using oil for two reasons, it does them out of a job or they aren't confident enough to use it. Bottom line is there is no better solution unless you like plastic looking,feeling floors and some people do. Each to their own.

I agree that it can be upsetting at this stage but your timber will all darken naturally and the difference will become less obvious over time and once you have furniture and rugs in place it's likely to be one of those issues that only you and no one else will notice. And I defy anyone to not have something like this in their house which has been newly built/renovated. I know this isn't terribly helpful but I don't think ripping anything up to start again or going to great lengths to seek recompense from supplier/installer is going to help your blood pressure either (by all means raise concerns with them and ask for suggestions from them).

When you sand and strip stain you take a little of the timber off and get back to bare timber. So you can change colour. But it really depends on the thickness left. I have 70 year old boards and am at that point where some boards are too thin. But there are a lot of older houses with thicker boards.