Here is the trim colour - to help others out. and in use...

Also, if you take a look under the "Find Pros" tab on Houzz you can search for tradespeople in your area - tilers, landscapers etc.

We used an outdoor version of the concrete look tiles we used in our bathrooms. The tile have a rougher and slightly grooved surface which make them non slip. We used the same tiles as water line and pool coping. Once installed, we had a separate guy come in and hone the edges. Only cost a few hundred dollars.

We have 600x400x30mm limestone pavers and would like to replace our old clay pavers with a more modern look. Question: Can a 400mm wide paver sit on top of a 350mm wide pool coping bed? The coping bed is raised about 150mm above the soil. About 20mm of the paver will go over into the pool side as an edge, 350mm lay on the coping bed, leaving 30mm hanging over, well, nothing. The limestone pavers are dense, heavy, 30mm thick. Question : do you think they will crack or break? Is it do-able or should we cut down the pavers to 350mm width (extra cost). Appreciate your advice Houzzers.