Your tile will co-ordinate beautifully with the timber if you can pick one of the darker colours out of the timber and select a tile in this family of colour. The trick to making a colour concept work is to either co-ordinate or contrast. If your timber is as busy with grain and colour as the image you've shown, then maybe co-coordinating is the best way to go. Never chose materials independently of each other - always take a tile sample home to see in the natural light, next to the timber. I hope it all works out the way you envisage it. Cheers, Michelle

The floor tile is basically a flat colour there's no vein or pattern at all. It's the bench that has the pattern. We already have a skylight and the only other area we can put a window has an a/c unit unfortunately. The other walls have rooms on either side. It's tough. I found another tile yesterday I love. But from about 11 until 3pm, the entire island bench has this yellow hue to it. I think because no direct sunlight is hitting it?? But mornings and evenings it looks lovely! I might just have to bite the bullet and go with how nice it looks for the majority of the time (mornings and evenings). That's when we are most there anyway.

Hi Kirsty, could you please advise the colour of your vanity and whether it is a custom made one and if not, could you let me know its name and where you bought it. Also, what is the colour of your floors tiles and where did you get them from. (I have come to the conclusion that charcoal/dark grey tile plus a much lighter grey tile plus white on some walls plus a timber vanity or timber accessories in bathroom , plus white (or close to it) below sink counter top is the way to go for a beautiful bathroom. The trick is figuring out exactly what proportion of each colour to use and where to put them for each particular layout.

Hi Sofia I definitely think brick lay would work better on the walls in the bathroom purely because you have a 30x30 on the floor and a 30x60 on the wall. You will find the tiles could look out of place trying to stack them. It would be a different matter if they did not share 1 or more dimension. Perhaps in the ensuite, consider doing something like this: [https://www.houzz.com.au/photos/what-architecture-beirutful-house-eclectic-patio-london-phvw-vp~14310278[(https://www.houzz.com.au/photos/what-architecture-beirutful-house-eclectic-patio-london-phvw-vp~14310278) Tile the floor and half way up the back wall with the "floor tiles", perhaps a tile or 2 above the vanity unit and then continue with the white tiles to the ceiling. You could hang your mirror so it covered about 1/4 of the "floor tile" and 3/4 of the white above the centre of the sink. In the main bathroom consider something like this: [https://www.houzz.com.au/photos/victorian-dream-bathroom-victorian-bathroom-london-phvw-vp~39122647[(https://www.houzz.com.au/photos/victorian-dream-bathroom-victorian-bathroom-london-phvw-vp~39122647) Tiling the back wall to the shower in the "floor tile" to the ceiling with the white tiles behind the loo to the ceiling. Alternatively, tiling the entire back wall with the "floor tiles". The first option may make the bathroom feel smaller if the shower takes up more than 1/3 of the back wall. Doing the two different options would give the bathrooms continuity, but also some individuality. I hope this helps. Look forward to perhaps seeing the outcome. James