The best way to 'hide' something that you don't like is to draw the eye elsewhere. The screens etc that have been recommended with vines over them are not a good idea. I would suggest 3 trees within the lawn area and not in a perfect triangle. One could be placed in front of the problem area. Eventually you could make a garden bed of decent sized proportion, that would have all trees within and underplant the trees with the same low plant throughout - like a good native grass like plant. The use of the 1 plant will make the area look even bigger and will provide unity to the design.

The plan looks a nightmare - bedrooms facing the street, a tiny internal bathroom with no window to the outside (is that legal?) and a "lounge" that looks like it was meant to be a third bedroom. If the internal walls are stud and don't support the roof you're in with a chance, but I'd say to do a proper job the cheap option is NOT going to work. I'd put two bedrooms where the current family room and lounge are and extend the bathroom into the boot room to give window access, or scrap the current bathroom altogether and use some of the space in what is now the kitchen for a new one. Keeping the WC separate is a good move. If you make the street side the social side of the house you can open it right out and create a big front porch that's a social spill-over from the kitchen/dining area, creating indoor-outdoor flow. Planting (two or three shade trees and some stands of tall perennials rather than a "green fence" hedge) keeps your front garden private yet inviting and stops your front porch becoming a stage set for the street. Good luck! I think you'll turn this very ordinary house into a much nicer place to live!

I really loved this brick when we found it and I still do, but I do have some comments about it. Unfortunately my design brief for a "fireplace hearth" in my farmhouse for my firebox turned out much bigger than expected, but that's another story. As far as the San Selma smoked cloudy silver brick is concerned the brick layer didn't like it much. It was a bit crumbly for him. There are even a couple of cracks already inside the brick hearth. We will have to be careful when securing our mantle piece to it. I don't know that I would do a whole house in this brick. As far as the look of the brick I love it. Its earthy, and suited my farmhouse profile inside and out. It does matter what colour the grout it. It really matters. I wasn't too happy with the grout choice by the bricklayer and should have taken more care to think about it. It's darker than I wanted. Take the time to work out what grout looks best. The same as you would pick a paint colour. We also struggled to choose a colorbond roof colour for where the outside of the brick was seen. We chose Windspray. Doesn't match perfectly as windspray is more yellow/green undertones....(something we are learning as we go along) but it's only a small area seen and hopefully we will find a paint to blend it all together.

Design inherently involves weighing up options against priorities within certain limitations/conditions/contexts. Structural integrity for the building needs to be addressed/managed either way and there are appropriate regulations/processes in place to ensure this occurs in order to achieve building approval ......the question here is more what do you want it to look like - ie do you want internal brickwork or plasterboard? You can manage termite risk or fire risk in various ways/methods.....best you balance/work through all this with the design professional you are working with or discuss some of the pro's & cons & cost differences of certain specification one way or the other with a local builder if you can